Pressure washers are powerful pieces of cleaning equipment that can be used for several purposes in different industries. However, they could break down after prolonged use. For instance, the pressure washer could start and then switch off immediately. A variety of problems could cause such issues. Sometimes, solving the problem requires changing a few Karcher pressure washer parts or following the instructions in the user manual.

Pressure Washer Parts To Check And Replace Or Repair

When a pressure washer starts acting up, some parts of the device could be faulty, causing the issues. Here are some common pressure washer parts that may need to be replaced or repaired.

• Spark Plug
• Fuel Cap
• Ignition Coil
• Carburetor

Spark Plug

The spark plug is among the Karcher pressure washer parts that can cause a pressure washer to stop running. The pressure washer may stop running when the spark plug is damaged or dirty. However, this issue is pretty easy to resolve. All the user needs to do to resolve the issue with a dirty spark plug is to clean it with a wire brush. This helps to remove all the build-up on the electrode. But if the spark plug is damaged, it must be replaced.

Fuel Cap

The fuel caps are among the pressure washer accessories that can cause the pressure washer to stop running. If the user doesn’t seal the fuel caps properly or it is faulty, it won’t close tightly. When this happens, air will get into the fuel tank, and the engine will not start. This is another issue that is easy to handle. The user should check the fuel cap to see if the O-ring is not faulty. The user should close the tank firmly if the O-ring is in good working condition. But if the O-ring is faulty, then it needs to be replaced.

Ignition Coil

A pressure washer may stop running if there is an ignition coil problem. If the ignition coil is damaged, it won’t be able to provide the spark to ignite the fuel in the engine. When this happens, the engine won’t start. This is a common problem in most pressure washers, including the Kodiak pressure washer.

Carburetor

The carburetor is responsible for mixing fuel and air in their correct proportion. If the carburetor is clogged, the engine may stall. If the carburetor is clogged, the user can remove it and clean it with a carburetor cleaner. This helps to remove any build-up, but if the carburetor is faulty it should be replaced.

Contact us at Roy Turk Industrial Sales today if you want the best quality pressure washer parts in Canada. We are a licensed Karcher dealer and distributor known for supplying the best cleaning supplies and janitorial equipment in Canada. Our tradition of excellence has seen us build valuable relationships with several companies as they turn to us for all their cleaning supplies.

The post Troubleshooting And Repairing A Pressure Washer appeared first on Roy Turk.