Virtually the innovative laser marking process is about all plastics and metals. It is also with other various materials with high contrast but without adding any type of undesirable substance. The typical physical effect in most cases of the laser marker that induces a color change just within the material. That is why there is no modification of surface by the corrugations or burrs. To achieve the best results on almost every type of material different types of laser sources and laser marking methods are used check over here.

The flexibility of laser marking

The process of innovative laser marking is highly flexible than any other marking process. Any images and fonts can be marked by a laser marking machine without changing any die, stencil, punch and etc, unlike any other conventional process.

The features of laser marking

• Non-contact, permanent innovative laser marking, abrasion-resistant offered by laser marking machine onto almost any type of material.
• The process of laser marking is a safe and clean process. It is water-proof, chemical-proof, fuel, oil and grease proof.
• On finished products laser marking can be done so there is no pre or post-processing.
• As quality marking standard the laser marking is accepted internationally.
• For fast and accurate setup the laser marking location is shown by the visible pilot beam.
• Significantly laser marking helps in cutting the operating cost by reducing the tool cost, labor cost, and consumable cost, along with the setup time and the rejection that is improved the cycle time.
• Laser marking can be atomized and also integrated with an online process and this is one of the prime advantages of it.

The use of laser marking and laser engraving machines

• Variable batch numbers, serial numbers, 1D, 2D barcode, and date coding with the support of the software can be laser marked.
• With the features of Windows True Type Fonts, you can text laser marking.
• Laser marking can be done on Medical Instruments, Consumer Goods, Jewellery, Electronics Parts, Automotive, and Giftware etc.
• By using laser marking you can clean metal and plastic surfaces.
• On Cell Phone Accessories laser marking can mark just like as on Pen drive and Battery SIM Card.
• Laser marking can be fine or engrave deep.

The systems of laser marking

The successful processes of laser manufacturing basically depend on the successful laser system integration. Designers should develop the innovative laser marking and laser engraving machines in the area where the laser, motion, tooling, and software work properly. And also able to integrated into a whole to support the desired flow of the process. There are many integrators who actually don’t understand lasers so it can be a challenge to put all the pieces together. So they have to depend on the manufacturer of the laser to integrate the system. If a problem arises subsequently or if any changes are needed to adjust the new product then it is not possible for the integrator to repair or modify the laser system.

Laser marking power supplies

Actually, laser marking is the marking process which uses to utilize the laser light to mark such as melt, ablate, remove, or vaporize the materials by using a fine spot diameter which is ranging from 0.002 inches to 0.01 inches. With short pulses, the laser marks provide negligible heat input and precise control. It is a fast and clean technology. Laser marking is also known as laser etching or laser engraving and it is replacing rapidly the older methods of marking. In this widespread adoption, the key factor is the exponential increase to use in the direct marketing as a part of information. It is also used to enable to trace and track across many industries such as automotive electronics and medical device.

The post Basic Information about Laser Marking Machines appeared first on Wipsen.org.