How to mount a Farmhouse Sink are always in demand due to their fashionable and admirable looks. Adding them to one’s kitchen immediately adds a sophisticated touch which makes your interiors look extravagant.
Manufacturers of farmhouse sinks commonly use stainless steel, fireclay, granite composites, cast iron, copper, porcelain, and stone. Hence, one does not only invest in style but also in durable quality.
However, if people do not install their sinks properly, they will simply be draining their money. Not only will it look unattractive but you will also be presented with several problems like leakages and cracks over time.
So today, we will be teaching our audience how to mount a farmhouse sink. Read every word to identify the techniques!
Step by Step Guide Installing How to Mount a Farmhouse Sink
Things you will need:
- Safety Glasses
- Measuring Tape
- Wooden Braces
- Farming Square
- Drill
- Level
- Hacksaw
- Support Frames
- Pencil
- Silicone Sealant
Step One: Choosing the Right Sink
Farmhouse sinks often run out of stock meaning you need to order them months ahead of your installation period. Before purchasing, there are several things you need to check to make sure it is suitable for your kitchen.
While choosing the sink, firstly look into all the materials. Research on their benefits and drawbacks for identifying what is suitable for your kitchen and will require less effort for maintenance. Remember that this will also affect your installation process. Undermount installation, flush-mount installation, and built-up installation are the fitting options you will be presented with.
Up next, you need to pick a suitable dimension for your sink. This should be based on two factors: the amount of space you can provide in your kitchen for the sink and the weight that your cabinets can hold up. Anything that is too big or too small will seem out of place and ruin the look of your interior. Similarly, if your sink is too heavy and cannot be held up by the cabinet, it is very likely to break down.
Tip: If you have a base cabinet with your old sink installed, simply look for a sink in that dimension to make work easier for you.
Step Two: Getting the Cabinet Area Ready
In case the support frames of your old cabinet are not enough to carry the weighty farmhouse sinks, install new support frames. Initiate by cutting off the water supply using the valves present underneath your old sink. Disconnect the water pipes afterward and turn on the tap to let any remaining water out.
Once this is done, remove all the cabinet doors, drawers, and other parts. One by one unscrew all the pieces and keep them aside.
Step Three: Building a New Support Frame
With your sink’s dimensions known, you can now work on building a support frame for the sink. Choose a material that can support the sink’s weight.
Use a pencil, level, and your measuring tape to make the necessary marking on the wall and the wooden braces. You can use a template of the sink installation to identify the structure. Once you have double and triple-checked all the marks, you can go ahead and cut out the pieces for your support frame and wooden braces.
Since your support frame is ready, drill in holes onto the wall and start screwing the pieces in. Be slow and patient to avoid making holes in the wrong places.
Step Four: Installing Your Farmhouse Sink
You can now start positioning your farmhouse sink onto the newly built structure. Use levels to get it straightened and when you are sure it is perfectly lined up with your markings, leave it be and connect the drain.
Now, using some plumber’s putty and silicone sealant, make sure your sink’s drain and strainer are firmly stuck onto the position. You should also connect it properly to the plumbing system to ensure a smooth water flow.
Step Five: Attaching the Countertop
In case you intend to use your old countertop, simply make sure the cut-out matches the dimensions of your sink. Then, put it into position and paste all the edges with your silicone sealant.
If you wish to install a new countertop, start by choosing the material (Tip: Try to match it with your sink material to get a stunning look). You should then hire a professional to cut the material out properly and fixate it on top using sealants.
Step Six: Assembling the Cabinet
Since the sink has been placed in its designated position, you can now focus on getting your cabinet parts together. Gather all the parts and screws and hinge them onto their original spots.
You can also use pieces of wood to build yourself a new cabinet. Use the level and measuring tape to create the correct shape and make markings with chalk or pencil. Once the measurements are ready, start cutting the pieces and drill through them to attach using screws.
The farmhouse sink has now been installed! Cheers to getting the job done!
FAQs
Can you wall mount a farmhouse sink?
Yes, you can wall mount a farmhouse sink. However, a wall build-out will be required so that the water supply tubes can be traveling out of the wall.
Do farmhouse sinks need extra support?
As farmhouse sinks are rather heavy, extra support will be required to attach them to walls or cabinets. Although some cabinets may be able to hold the sink’s weight properly, once it has been filled up with water, the weight can exceed 300 pounds.
Are undermount sinks worth it?
Undermount sinks are the way to go for busy households or workplaces. This is because it is extremely easy to clean and does not require a long scrubbing time.
How do you hide pipes under a wall mounted sink?
Pipes of wall mounted sinks are usually hidden with the assistance of paint. You can use the same shade as your wall to create camouflage. Decorative tapes can also be used although they are more likely to make your pipes stand out.
Conclusion
If you have followed our guide on how to mount a farmhouse sink, you have probably successfully accomplished your task. How does the end result look? Stunning right? That’s the beauty of farmhouse sinks for you. If you want to check out more sinks, click here to access a list of our favorite options. We promise not to disappoint
