Cleaning Tips for Your Hot and Cold Water Dispenser

Removing the Water Jug From the Machine: A Step-by-Step Guide

Before cleaning the hot and cold water dispenser, ensure that it is unplugged and that there is no power source connected. Carefully remove the water jug from the top of the machine and transport it to a well-ventilated and easy-to-clean area.

Draining Water from Hot and Cold Water Dispenser: Step 2

To drain the water from the device, it is recommended to use a designated container. During this process, precautions must be taken to ensure that the power plug and cleaning area remain dry.

Removing and Cleaning Components: Step 3

After draining all the water, carefully remove the machine cover, water faucets, water divider, and drainage tray. Use a wet cloth to thoroughly clean each part. Pay special attention to the water tank and faucets, using a specialized brush to remove any lime scale build-up. Avoid using strong detergent, as it can damage the components.

4th Step: Repeatedly Washing the Hot and Cold Tanks with Fresh Water

After cleaning the components, rinse the hot tank and cold tank thoroughly. Allow them to dry completely before putting them back in their original positions.

Step 5: Washing the Exterior of a Hot and Cold Water Dispenser

To maintain the cleanliness of the hot and cold water dispenser, follow these steps:

1. Obtain a clean, soft, and absorbent cloth.
2. Gently wipe the outer shell of the dispenser using the cloth.
3. Avoid using cleaning chemicals that may cause peeling or water contamination.

Installation Complete: Put Hot and Cold Water Dispenser Back in Place

Follow the installation steps provided below to properly install each component of the hot and cold water dispenser. After installation, handle the device gently during the moving process to prevent any scratches on the machine body.

Plugging In and Placing Water Jug After 30-Minute Cleaning – Step 7

After returning the machine to its initial position, allow approximately 30 minutes for it to regain stability and for its components to dry thoroughly. Then, reconnect the power source, securely position the water jug, and begin operating the device in its regular manner.

Maintaining a Hot and Cold Water Dispenser: 2 Essential Tips

• Turn off the power of the device when not in use or when the water runs out to conserve electricity.
• Ensure the dispenser is placed on the floor to prevent electrical leakage and ensure customer safety.
• Place the dispenser in a properly ventilated location to discourage mice from nesting and potentially damaging the wires.
• Avoid plugging the dispenser into the same power outlet as other devices to prevent power surges that could damage it.

Thank you for following our instructions on how to safely and effectively clean your hot and cold water dispenser. If you have any questions or need assistance, please feel free to leave a comment below. We are here to help!

The post A Guide to Maintaining Your Home Water Dispenser appeared first on meo.tips.