Auto Pro Locksmith London, UK | Emergency Locksmiths For Key Cutting And Replacement

Reasons Your Car Key Won’t Turn in Ignition

If you’ve recently purchased a new car and you’re experiencing a problem with your car’s key, you’ve probably started to wonder why it won’t turn in the ignition. There are a few different reasons for this problem, including ice buildup, lint buildup, or a split wafer. Ultimately, you want to figure out the cause of the problem before you try to force the issue.

lint buildup

Sometimes, a key won’t turn in the ignition for a number of reasons, including lint and grease buildup. If you have a clogged ignition cylinder, the key will not turn in the ignition and will lead to even more issues. To remove the obstruction, you can manually blow out the cylinder with a hose. But be careful – cleaning fluids may damage your vehicle’s extra security features.

If the lint and dirt are the cause of your key’s squeaking sound, you should spray the lock with lubricant to free it. This can be done every six months, but some experts recommend anti-seize silicon spray. If this isn’t an option, you can take the key to a locksmith for a new code key.

ice build-up

If your car key won’t turn in the ignition, the most likely cause is ice build-up. In the winter, ice will accumulate on your car’s locks and prevent them from working properly. The ice will also stop the key from turning in the lock because pieces of ice will prevent the mechanism from turning. You can also try spraying some silicon de-icer into the lock.

Another common cause for ice build-up on the key is poor grounding. A professional automotive electrician can check the electrical grounding system for your vehicle to make sure everything is properly insulated and in good condition. In some cases, poor grounding will result in the key being warm and unable to turn. In these cases, you should contact a Subaru service center, which will provide you with the correct solution for your specific situation.

Split wafers

If your car key replacement in London won’t turn in the ignition because of split wafers, you can try jiggling it. You might need to tap the lock cylinder, but that won’t help much. Jiggling the key can help free the split wafers, and the key can then turn again. If the problem persists, however, you’ll need to contact a locksmith.

Split wafers are common in older vehicles. These are pieces of the ignition cylinder, which are designed to prevent theft. However, the split wafers are prone to cracking and breaking over time. A Tempe Locksmith technician sees this problem often. In addition to cracking, they can also warp in the ignition if you turn your key aggressively. To avoid warping in the ignition, you should use a key ring with a lighter weight.

Split wafers wear out and cause your car key to fall off the ignition. When you notice this problem, you can replace the broken ignition wafers at a local Honda dealership. The process is simple and free if you’re handy. The process should take no longer than 30 minutes. The key should turn in the ignition again once you remove the worn-out wafers. This problem is common in many Honda models, including the Civic, Pilot, CRV, and Accord.

The next step in fixing your car key won’t turn in the ignition due to split wafers is to replace the wafers. A split wafers problem is caused when the cylinders in the ignition fail to rotate properly. They can also break because the key is not pinned correctly. In such cases, you need to remove the entire ignition lock and replace all the wafers.

Working condition of ignition cylinder

If you are unable to start your car because of a broken or smashed key, you may need to replace the ignition cylinder. It may be difficult to replace it on your own since you have to remove the steering wheel cover and manipulate the key. Otherwise, you might end up spending lots of money at the mechanic or a locksmith. Fortunately, there are some DIY solutions that you can try out before spending any money.

If you don’t have time to take your car to a repair shop, you can try to self-diagnose the problem. Taking it to a shop is not necessary if the problem is minor. However, if it is too complicated, you can take it to a professional for a diagnosis. To ensure the safety of your car, make sure you replace the ignition cylinder with the same make and model as the original. However, you must note that after replacing the cylinder, the car key will have an entirely different identity from the door keys.

If you have a spare key, check whether the one you have fits inside the ignition cylinder. A worn key may not fit in the ignition cylinder properly, so you must first check the condition of your keys. If the key has a few cracks or is too worn, it may be time to replace it. If this doesn’t work, a local Tempe Locksmith will be able to help you out.

The next reason why your car key won’t turn in the ignition is the key itself. A worn ignition cylinder will prevent the key from turning in the ignition. You can try replacing the ignition cylinder or replacing the lock, or you can try replacing the key. However, this solution is not always practical and will require you to purchase new keys. Similarly, if the ignition cylinder has become damaged, a broken key may prevent the key from turning in the ignition.

In some cases, the key cylinder might have become jammed. You can check the cylinder’s condition by inserting your key into it several times. Another possible cause is the steering wheel lock. Using a flashlight, you can check the cylinder for obvious obstructions. Besides, you can also use compressed air to flush away loose matter that has built up inside the cylinder.

The post Reasons Your Car Key Won’t Turn in Ignition first appeared on %BLOXLINK% and is written by %AUTHOR LINK%