If your home has recently undergone an upgrade, chances are there’s a ton of debris and dirt left in the remodeled rooms. Even if you managed to cover all your furniture, ventilation system, floors and windows, and the like with plastic sheeting for protection, the post-construction phase of your Renovation may still need dust removal. 

Fortunately, with good preparation and an entire day dedicated to Cleaning, you can get the job done. Doing this as soon as the remodeling is complete will make it easier to polish your rooms spotless so you can open them up for household use. 

Here’s how to clean up after a home renovation: 

Walls 

One of the best approaches for cleaning after a renovation is to start from the top and work your way down. This can help prevent dirt from resettling in areas that you’ve previously cleaned. 

You can gather your cleaning tools and begin at the highest point of the Wall near the ceiling. For the wall specifically, you’ll need to have a duster, microfiber cloth, a bucket of water, a dust mask and rubber gloves and a ladder to reach higher up. If you have any wall debris from renovation construction, you can click here and look at how to dispose of it safely. 

To get cleaning, you can use the duster first to remove the first layer of dust and debris from the walls. Once you’ve completed this, you can move on to wiping the walls down with a damp cloth and your chosen cleaning creams and sprays. For brick walls, be sure to clean between the grooves once the cement has dried, and use a cleaning scraper to remove any dried or hardened substance from the wall. 

Surfaces Of Furniture Pieces And Other Room Fixtures

Once your walls are dust-free, you can move onto the mid-level of the post-renovated room which is your furniture, appliances, and other fixtures. 

It can also include any surfaces such as counters, tables, desks, and stands. These are important areas for a deep and thorough cleaning because they’re parts of the house that your household interacts with the most and place ingestible items on. This is especially necessary for bathrooms and kitchens. In this case, when you dust and wipe down smooth surfaces with your microfiber cloth, be sure to use hygienic and disinfectant cleaner products. 

Also, use separate cleaning tools and cloths for toilets, drain holes, and taps after a bathroom and kitchen revamp. If you have upholstery or fabric-based furniture, you may need to use a wet and dry vacuum cleaner. Or a scrubbing brush to absorb dust out of them and a cleaning agent to give it a good wash and return it back to its natural color. Keep in mind that wooden furniture may need polishing after dusting. 

Windows And Glass Features

If you’ve had new windows or glass features such as doors and sliding panels installed, wait until the putty or frames are dry before cleaning. Another vital cleaning procedure is to make sure any remnant of glass debris from the renovation has been swept away to keep the area safe. From here, you can remove the plastic sheeting that covered the glass and start wiping it down. 

Effective tools to use are a glass cleaner spray and a soft fabric cloth moving horizontally and downwards so you don’t spread dirt across the glass surface. Alternatively, you can use a squeegee to wash from the fabric side then slide it across from the rubber blade to make it squeaky clean again. Once you’ve completed this, take a section of a newspaper and rub it against the glass to get rid of water droplet prints and streaks smudges, and stains. 

Meanwhile, scuff marks left behind by the construction can be removed with a scraper. Outside windows can be hosed down before being wiped down. 

Flooring 

The final part of your home renovation cleaning is the flooring. Tiles, linoleum, laminate, vinyl and other smoother flooring are generally easier to clean. While fabric floors such as carpets and carpet tile may need more effort and time. In either case, you can begin with a thorough sweep of the floor using a broom or a hard bristled brush for carpeting to remove the surface layer of dust and dirt. 

With non-fabric flooring, all that’s left is a simple mopping with a bucket of water, floor cleaner and a traditional spaghetti mop or flat wrong out mop. Skip the water and mop dry if you have genuine hardwood floors. Carpets will then need to be vacuumed and for deep cleaning, use carpet cleaning soap, hot water, and a scrubbing brush to destroy microbes inside. Be sure to leave the room well-ventilated while your carpet dries. 

Conclusion

Cleaning up after renovation takes dedicated time and effort to get the job done correctly. Most of the tools you’ll need are cleaning cloths, water, cleaning agents and in some cases, vacuums for a good wipe down. 

Any debris left behind during construction will need to be removed by rubble removal specialists. Keep your safety in mind by wearing protective equipment such as gloves and masks to prevent dust inhalation. In the end, you can leave the rooms to ventilate then they’ll be clean and ready to be used. 

The post How To Clean Up After Home Renovation appeared first on .