The industrious Passtcert IT experts through their own expertise and experience continuously produce the latest 300-360 Designing Cisco Wireless Enterprise Networks to facilitate IT professionals to pass the Cisco certification 300-360 exam. The certification of Cisco 300-360 more and more valuable in the IT area and a lot people use the products of Passtcert to pass Cisco certification 300-360 exam. Through so many feedbacks of these products, our Passtcert 300-360 Designing Cisco Wireless Enterprise Networks prove to be trusted.
Share some CCNP Wireless 300-360 exam questions and answers below.
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. Which of the following is a requirement for the design?
A. overlapping -72 dBm coverage from two access points
B. overlapping -67 dBm coverage from two access points
C. continuous -67 dBm coverage from one access point
D. continuous -72 dBm coverage from one access point
Answer: C
Which two options describe best practices that must be completed after a wireless installation is finished? (Choose two.)
A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.
B. Consult with the customer to ensure that the IT staff has a complete set of design and installationdocuments.
C. Make sure the customer is aware that they should consider purchasing a support contract immediately afterthe installation is complete.
D. Spend time with the customer to show them the controller GUI and inform them how they can reach theCisco TAC if they have any problems.
E. Test all the customer’s wireless devices and applications to ensure they are working properly.
Answer: B,E
A Cisco 7925 phone at a client’s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully. What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
If you are still struggling to get the Cisco 300-360 exam certification, Passtcert will help you achieve your dream. Passtcert 300-360 Designing Cisco Wireless Enterprise Networks is the best training materials. We can provide you with a good learning platform. How do you prepare for this exam to ensure you pass the exam successfully? The answer is very simple. If you have the appropriate time to learn, then select Passtcert 300-360 Designing Cisco Wireless Enterprise Networks. With it, you will be happy and relaxed to prepare for the exam.
This is a practice test website. It is available on the Internet with the exam questions and answers, as we all know, Passtcert is the professional website which provide 300-360 Designing Cisco Wireless Enterprise Networks.300-360 exam is a Cisco certification exam and IT professionals who have passed some Cisco certification exams are popular in IT industry. So more and more people participate in 300-360 certification exam, but 300-360 certification exam is not very simple.
Share some CCNP Wireless 300-360 exam questions and answers below.
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. Which of the following is a requirement for the design?
A. overlapping -72 dBm coverage from two access points
B. overlapping -67 dBm coverage from two access points
C. continuous -67 dBm coverage from one access point
D. continuous -72 dBm coverage from one access point
Answer: C
Which two options describe best practices that must be completed after a wireless installation is finished? (Choose two.)
A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.
B. Consult with the customer to ensure that the IT staff has a complete set of design and installationdocuments.
C. Make sure the customer is aware that they should consider purchasing a support contract immediately afterthe installation is complete.
D. Spend time with the customer to show them the controller GUI and inform them how they can reach theCisco TAC if they have any problems.
E. Test all the customer’s wireless devices and applications to ensure they are working properly.
Answer: B,E
A Cisco 7925 phone at a client’s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully. What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
If you are still struggling to get the Cisco 300-360 exam certification, Passtcert will help you achieve your dream. Passtcert 300-360 Designing Cisco Wireless Enterprise Networks is the best training materials. We can provide you with a good learning platform. How do you prepare for this exam to ensure you pass the exam successfully? The answer is very simple. If you have the appropriate time to learn, then select Passtcert 300-360 Designing Cisco Wireless Enterprise Networks. With it, you will be happy and relaxed to prepare for the exam.
This is a practice test website. It is available on the Internet with the exam questions and answers, as we all know, Passtcert is the professional website which provide 300-360 Designing Cisco Wireless Enterprise Networks.300-360 exam is a Cisco certification exam and IT professionals who have passed some Cisco certification exams are popular in IT industry. So more and more people participate in 300-360 certification exam, but 300-360 certification exam is not very simple.
