It is enough to help you to easily pass the exam.How far the distance between words and deeds? It depends to every person. If a person is strong-willed, it is close at hand. I think you should be such a person. Since to choose to participate in the Cisco 300-360 certification exam, of course, it is necessary to have to go through. This is also the performance that you are strong-willed. Passtcert Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps is the best choice to help you pass the exam.
Share some CCNP Wireless 300-360 exam questions and answers below.
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: A
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm.
What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: B
An engineer must design wireless coverage in thick-walled stairwells. Which information should the engineer refer to when determining where APs can be installed?
A. Local or National Building Code
B. IEEE
C. BICSI TDMM
D. Cisco Hardware Installation Guide
Answer: A
A network engineer is preparing for an office site survey with a height of 2.5 meters.
Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services.
Which of the following is a requirement for the design?
A. overlapping -72 dBm coverage from two access points
B. overlapping -67 dBm coverage from two access points
C. continuous -67 dBm coverage from one access point
D. continuous -72 dBm coverage from one access point
Answer: C
An engineer must design wireless coverage in thick-walled stairwells.
Which information should the engineer refer to when determining where APs can be installed?
A. Local or National Building Code
B. IEEE
C. BICSI TDMM
D. Cisco Hardware Installation Guide
Answer: A
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have.Before you decide to buy Passtcert of Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps, you will have a free part of the questions and answers as a trial. So that you will know the quality of the Passtcert of Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps. The Cisco 300-360 exam of Passtcert is the best choice for you.Through Passtcert you can get the latest Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps. Please purchase it earlier, it can help you pass your first time to participate in the Cisco certification 300-360 exam.
Using Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps provided by Passtcert to pass Cisco certification 300-360 exam is not a problem, and you can pass the exam with high scores.Cisco certification 300-360 exam has become a very popular test in the IT industry, but in order to pass the exam you need to spend a lot of time and effort to master relevant IT professional knowledge. In such a time is so precious society, time is money.
Related article: http://it-practice-exams.blogspot.com/2017/09/update-300-360-widesign-designing-cisco.html
Share some CCNP Wireless 300-360 exam questions and answers below.
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: A
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm.
What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: B
An engineer must design wireless coverage in thick-walled stairwells. Which information should the engineer refer to when determining where APs can be installed?
A. Local or National Building Code
B. IEEE
C. BICSI TDMM
D. Cisco Hardware Installation Guide
Answer: A
A network engineer is preparing for an office site survey with a height of 2.5 meters.
Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services.
Which of the following is a requirement for the design?
A. overlapping -72 dBm coverage from two access points
B. overlapping -67 dBm coverage from two access points
C. continuous -67 dBm coverage from one access point
D. continuous -72 dBm coverage from one access point
Answer: C
An engineer must design wireless coverage in thick-walled stairwells.
Which information should the engineer refer to when determining where APs can be installed?
A. Local or National Building Code
B. IEEE
C. BICSI TDMM
D. Cisco Hardware Installation Guide
Answer: A
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have.Before you decide to buy Passtcert of Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps, you will have a free part of the questions and answers as a trial. So that you will know the quality of the Passtcert of Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps. The Cisco 300-360 exam of Passtcert is the best choice for you.Through Passtcert you can get the latest Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps. Please purchase it earlier, it can help you pass your first time to participate in the Cisco certification 300-360 exam.
Using Designing Cisco Wireless Enterprise Networks 300-360 WIDESIGN exam latest dumps provided by Passtcert to pass Cisco certification 300-360 exam is not a problem, and you can pass the exam with high scores.Cisco certification 300-360 exam has become a very popular test in the IT industry, but in order to pass the exam you need to spend a lot of time and effort to master relevant IT professional knowledge. In such a time is so precious society, time is money.
Related article: http://it-practice-exams.blogspot.com/2017/09/update-300-360-widesign-designing-cisco.html
This post first appeared on Latest IT Certification Exams Dumps, please read the originial post: here
