White Hair is a stunning and trendy hair color that can make you stand out from the crowd. It is a cool and icy shade that can suit many skin tones and hair types. However, getting white hair is not an easy task, especially if you have dark or colored hair. You might think that you need to bleach your hair multiple times to achieve white hair, but that can damage your hair and scalp, and cause dryness, breakage, and irritation.

Fortunately, there are some alternative methods that can help you know how to get natural white hair, or with minimal bleaching. These methods are safer, cheaper, and more convenient than bleaching, and they can also give you good results. In this blog post, we will show you how to get white hair without bleach, using some easy DIY methods. We will also give you some tips on how to maintain and style your white hair dye without bleach. Read on to find out more!

How to Get White Hair Without Bleach: The Basics

Before you try to get white hair without bleach or diy white hair, you need to know some basics about hair color and hair care. You need to understand the following factors:

1. The Level And Tone Of Your Hair

The level of your hair is the degree of lightness or darkness of your hair, which ranges from 1 (black) to 10 (platinum blonde). The tone of your hair is the hue or undertone of your hair, which can be warm (red, orange, yellow), cool (blue, violet, green), or neutral. To get white hair, you need to reach a level 10 and a cool or neutral tone, which means that you need to remove any pigment and warmth from your hair.

2. The Porosity And Condition Of Your Hair

3. The Products And Tools You Need

• A high-lift dye, which is a type of permanent hair dye that can lift and deposit color in one step. It is usually labeled with a number and a letter, such as 12.1 or 11A, where the number indicates the level and the letter indicates the tone. For white hair, you need to choose a high-lift dye with a blue or violet base, which will counteract any yellow or orange tones in your hair.

• A developer, which is a product that activates the white hair bleach and helps it penetrate your hair. The developer comes in different volumes, such as 10, 20, 30, or 40, where the higher the volume, the stronger and faster the developer. For white hair, you need to choose a high-volume developer, such as 30 or 40, which will lift your hair to the lightest level possible.

• A toner, which is a product that adds color to your hair to cancel out any unwanted tones. For white hair, you need to choose a toner with a silver or platinum shade, which will neutralize any remaining warmth and create a cool and icy blonde.
• A purple shampoo and conditioner, which are products that contain purple pigments that neutralize any yellow or brassy tones in your hair and keep it cool and ashy. You can use them once a week, or as needed, depending on your hair condition.
• A mixing bowl, a tinting brush, a comb, some clips, and some gloves, which are tools that you need to apply the products to your hair.

Related article: Homemade Hair Bleach

How to Get White Hair Without Bleach: The Steps

Once you have the products and tools ready, you can follow these steps to get white hair without bleach:

Step 1: Prepare Your Hair And Scalp

Before you apply any product to your hair, you need to prepare your hair and scalp. You need to wash your hair with a clarifying shampoo to remove any oil, dirt, and product residue from your hair. You also need to avoid using any conditioner, as it can interfere with the dyeing process. You also need to protect your scalp from the developer, which can be irritating and drying. You can apply some petroleum jelly or coconut oil to your hairline and ears, and wear an old shirt and a towel to avoid staining your skin or clothes.

Step 2: Apply The High-lift Dye And Developer Mixture To Your Hair

Follow package instructions for high-lift dye application: mix dye and developer, section hair, apply with tinting brush, ensuring even coverage. Avoid contact with scalp or skin. Leave on for recommended time, typically 30-45 minutes, checking color every 10 minutes. Rinse with lukewarm water when desired lightness is achieved.

Step 3:  Apply The Toner To Your Hair 

For effective toner application, follow package instructions: mix toner and developer, section hair, apply evenly with tinting brush. Avoid scalp or skin contact. Leave on for recommended time, typically 10-20 minutes, checking color every 5 minutes. Rinse with cold water once desired white shade is achieved.

Step 4: Wash And Condition Your Hair

Continue to the blog “how to get white hair without bleach”, after you rinse off the toner, you need to wash and condition your hair to remove any traces of the products and to restore the moisture and health of your hair. You need to use a purple shampoo and conditioner to maintain the cool and ashy tone of your hair and to prevent it from turning yellow or brassy. You also need to use a deep conditioning treatment or a hair mask to hydrate and nourish your hair and to prevent it from becoming dry or damaged.

Step 5: Dry And Style Your Hair

After you wash and condition your hair, you need to dry and style your hair as usual. You need to use a hair dryer with a low to medium heat setting and a nozzle attachment, and blow-dry your hair from the roots to the ends in a downward motion. You can also use a round brush or a flat iron to smooth and shape your hair as you dry it. You can also use a heat protectant spray before using any heat tools, and a hairspray or a serum to finish and hold your hairstyle and to add some shine and smoothness to your hair.

How to Get White Hair Without Bleach: White Hair Extensions with Apohair 

With Apohair’s high-quality white extensions, weft hair extensions is an opt for you, you may achieve white hair without using bleach. To prepare your natural hair, apply a clarifying shampoo and skip the conditioner, making sure it’s in good condition and has a low to medium porosity. Apohair’s white extensions should be chosen to fit your desired platinum blonde degree and cool or neutral tone.

Use key goods and tools such as a high-lift dye with a blue or violet base, a high-volume developer, silver or platinum toner, and purple shampoo and conditioner. Apply with care, checking color frequently, and rinsing off until the desired lightness is obtained. Integrate Apohair’s white extensions for extra length and volume while keeping the cool and ashy tones with the right maintenance products.

How to Maintain and Style Your White Hair?

After you get white hair without bleach, you need to maintain and style your hair properly to keep it looking and feeling good. Here are some tips on how to do that:

• Use a purple shampoo and conditioner once a week, or as needed, to prevent your hair from turning brassy or yellow. Purple shampoo and conditioner are products that contain purple pigments that neutralize any unwanted warm tones in your hair and keep it cool and ashy.

• Beside know how to get white hair without bleach with the above methods, deep conditioning treatment is very important to keep your hair strong. Use a deep conditioning treatment once a week, or as needed, to moisturize and nourish your hair and prevent it from becoming dry or damaged. You can use a store-bought or homemade mask, or a leave-in conditioner, to hydrate and repair your hair and keep it soft and shiny.

• Use a heat protectant spray before using any heat tools, such as a hair dryer, a curling iron, or a flat iron, to style your hair. Heat tools can damage your hair color, such as swimming, sleeping, or exercising with wet hair, exposing your hair to direct sunlight, or using harsh products or tools on your hair. You can use a swim cap, a silk pillowcase, a hat, or a scarf to protect your hair from these factors. You can also use a color-safe shampoo and conditioner, and a gentle brush or comb, to preserve your hair color and prevent it from becoming dry or brittle.

Conclusion

Apohair hopes that this blog post has helped you understand how to get white hair without bleach, and how to choose, apply, and maintain your hair color. If you have any questions about this blog and human hair extensions of Apohair – the best Vietnamese hair supplier, please feel free to leave them below. Thank you for reading and happy hair day!

Next article: How To Bleach Hair With Peroxide