Starting with Candle molds

If you’ve only been making potted or hand-dipped candles, you may not have experience with candle making molds. Your candle making skills will never be complete without learning this aspect of the candle making business.

If you are not sure that you will continue to use candle making molds after your initial attempt, don’t spend a lot of money buying them at first. Determine what size you would like to start with and only buy that size. Mold prices vary by source. Small votive molds can be purchased per dozen for around $ 10. High-cost, large 10-inch round molds in the neighborhood of approximately $ 12 each.

If you plan to produce large diameter Raumduft, you will need to have more than one wick. For that reason, you may prefer to stick with molds with a diameter of 2 inches or less.

Seamless molds produce prettier sails than stitched ones for obvious reasons. They may cost more than other types of molds, but it’s worth it if you plan to sell your candles and want a more polished professional look.

Molds for cheap or better yet, free

If you don’t want to spend money on candle molds, you can use other mold things like cans. As long as the can is smooth inside so the candle can slide off easily, these tin molds work well. Keep in mind that if the can has a rim on top, it will prevent the candle from coming off easily. Be selective in the cans you choose for the molds.

There are many different types of molds you can choose from. In addition to round and square molds, there are octagons, stars, and many other shapes. The vast majority of tower candle molds are constructed of metal alloys; however, there are some plastic molds that are also suitable for the job.

Tip for releasing candles

Removing the candles from the molds after they are put on is sometimes difficult. If you don’t cover the inside of the mold before pouring it with an easy-release spray, chances are good that you’re having trouble. Using a silicone spray or cleaning the inside with vegetable oil helps to release the finished candle. Another reason why candles stick is because the wax is too hot when it is poured into the mold. Always check the temperature of the wax before pouring for this reason.

If you experience a problem with releasing candles, one tip many vendors use is to put the pan in the freezer for a short time. Another alternative is to place the candle in a bucket as soon as it is poured and pour cold water around it. If you try this, lower the candle so it doesn’t float and doesn’t pour water over the top of the mold.

Candle kits

If you are new to the fantastic world of candle making, you can start with a candle making kit, complete with molds. You should be careful to get the kit the size and shape of a candle you want to make. Many inexpensive kits come with plastic candle molds, but even these can work if you just want to try it out.

Add variety to your candle making

Tower or pillar candles look very professional when done correctly. If you’ve only made container candles, you owe it to yourself to test your hand by producing a wider variety of candles with candle making molds. Start with just a few additions at the beginning. If you like the candles you make with this method, you can add more molds to your collection a few at a time.