Get Even More Visitors To Your Blog, Upgrade To A Business Listing >>

11 Best Screws For Particle Board [Reviewed & Buyer’s Guide]

When it comes to woodworking projects, choosing the right screws is the next thing to do after deciding on the wood variety you’ll need. 

And that’s crucial since the strength of the wood joints will depend on the quality of the screws used. Now, the particle Board is a special variety used in many projects that include making interior cupboards, flat-pack furniture, and even wall and floor panels. 

It is denser, cheaper, and has higher tensile strength and uniformity than other varieties such as plywood. So, the screws for working with these wooden boards should be chosen carefully.

But there are a ton of options available in the market, which makes it difficult to take the right pick. That’s why we’ve tried to make your task easier by putting forth a list of the 11 best options to consider. 

With all said and done, let’s begin!

Best Screws For Particle Board

Our Top PickOur Top Pickhstcstbl-table__imageBolt Dropper #8 x 1" Wood Screw
  • Has flathead and cross drive
  • Plastic alloy coat
hstcstbl-table__imageKreg SML-C250-250 Pocket Screws
  • Square-drive head
  • Case hardened steel
hstcstbl-table__imageRok ROKS8X12TPSZ-100 Hardware Screws
  • #8 diameter
  • Zinc finish
hstcstbl-table__imageHard-to-Find Fastener 014973291563 Wood Screw
  • 2-inch length
  • Black phosphate finish
hstcstbl-table__imageBolt Dropper #10 x 1-1/2" Wood Screw
  • #10 diameter
  • 1½ -inch long
hstcstbl-table__imageFastenMaster FMGD003-75 GuardDog Wood Screw
  • Pozisquare drive
  • Piercing point
hstcstbl-table__imageWoodPro Fasteners AP9X212-1 Wood Screw
  • Type-17 point
  • Electro-Polyseal Coating
hstcstbl-table__imagePower Pro 48611 Wood Screw
  • Star drive
  • Bronze epoxy coating
hstcstbl-table__imageKreg SML-C125-100 Pocket Screw
  • Maxi-loc head
  • Self-tapping tip
hstcstbl-table__imageDeck Plus 48419 Wood Screw
  • 4-layer coating
  • Flat-head

Macro of silver screws

  1. Bolt Dropper #8 x 1″ Wood Screw

Particle boards can be joined with ultimate strength using these superior-quality wood screws from Bolt Dropper. Coming with a couple of amazing features, these screws make your wooden furniture stronger and sturdier. Thus, you can carry out most woodworking projects effortlessly when you have this screw at home.

#8 x 1' Xylan Coated Stainless Flat Head Phillips Wood Screw...
#8 x 1" Xylan Coated Stainless Flat Head Phillips Wood Screw...
  • DEEP CUT PHILLIPS, FLAT HEAD: Perfect for a counter sunk,...
  • BLACK XYLAN COATING: A plastic alloy coating used for the...
  • DIMENSIONS: Diameter: #8 | Length: 1" | Thread Type: Coarse...

Why Did We Like It?

What we liked the most about these screws is that their head was never exposed through the wooden surface. This is made possible by the full coarse thread running throughout their length, which ensures that they bite firmly in composite wood. Hence, it ensures that users are protected from any injury while working and handling the furniture later on. 

Another great feature is the deeply cut cross drive on their head that helps prevent stripping, which is otherwise common in ordinary screws. This issue arises when a driving bit is used with greater force or at a weird angle on a weaker screw. 

As for the material used, it is enhanced by a plastic alloy coat, which provides optimum resistance to chemicals and changing weather conditions. Not only that, but it also provides corrosion-resistant properties as it has an operating temperature ranging from -420 to 550°F. 

What Could’ve Been Better?

If you’re ordering the screws online, make sure you check the package upon delivery as the screws may be of the wrong diameter. In such situations, you must report the issue to the manufacturer immediately and request a replacement. 

  • Sit firmly in composite wood
  • Safe to handle
  • Prevent stripping
  • Offer great corrosion resistance
  • Screws of wrong diameter may be delivered
  1. Kreg SML-C250-250 Pocket Screws

The Kreg SMLC250-250 is another popular pack of highly efficient screws that can be used in securing joints between particle boards. It is loved by woodworking professionals and DIY furniture makers for the smooth yet durable utility. That’s why it makes for one of our top recommendations.

Kreg SML-C250-250 Pocket Screws, 2-1/2' #8 Coarse-Thread,...
Kreg SML-C250-250 Pocket Screws, 2-1/2" #8 Coarse-Thread,...
  • Square-drive head and self-tapping tip for easy driving...
  • Flat-bottom head and smooth shank draw the pocket-hole joint...
  • Case-hardened steel won’t bend, snap, or break
  • Coarse threads for softwoods, such as pine; and for plywood,...

Why Did We Like It?

First things first, these screws have a rare square-drive head that can be driven into particle boards with minimal effort. Moreover, they provide a larger bearing surface while the screw pulls tight in the pocket hole joint. Coupled with the smooth shank, they secure the joint to offer exceptional durability. 

Plus, the self-tapping tip on each piece ensures that the bit never slips and the screw remains perfectly fastened. 

We also liked the deep coarse thread on the lower portion of the shank that bites into the boards to enhance the grip. This feature makes them suitable for softwoods such as pine and MDF, a type of particle board.  

Finally, the case-hardened steel material provides immense strength and rules out chances of snapping, bending, or breaking.

What Could’ve Been Better?

These screws work perfectly to hold particle boards together and promise great durability. However, we wished there were other color options available for this product, which would have made it suitable for use in particle boards of different colors. 

  • Can be driven into boards with minimal effort
  • Non-slip bit
  • Enhances holding power
  • Highly durable steel material
  • Color options not available
  1. Rok ROKS8X12TPSZ-100 Hardware Screws

Next, we have picked this pack of screws from Rok Hardware, which is one of the leading home improvement hardware brands in the country. The ROK S8X12TPSZ-100 upholds the high reputation of the brand as they come with impressive features that facilitate better performance. So, let’s go ahead and take a look at all that’s on offer.

Rok Hardware #8 x 1/2' Standard Thread Truss Head Screws...
Rok Hardware #8 x 1/2" Standard Thread Truss Head Screws...
  • Used For Many Wood Working Needs
  • Diameter: #8
  • Length:1/2 in
  • Drive Phillips #2

Why Did We Like It?

The diameter of a screw is key to ensuring that it penetrates easily into wooden boards, and the  #8 diameter of these Rok screws does just that. As a result, they offer sufficient bearing surface to ensure that they are fastened properly.

In hindsight, the aggressive full coarse thread running throughout the length of the screw ensures that it binds the joints efficiently. This gives it superior holding power in particle boards. 

Furthermore, the Philips cross-drive head enables a tighter fit, and makes the wooden structures strong and more long-lasting. It also helps prevent head stripping, which is common in average screws. 

Added to this, they are protected with high-quality zinc plating, which resists corrosion and extends its service life considerably. 

What Could’ve Been Better?

The only disadvantage of these screws is that they might not be suitable for thicker particle boards, probably because they are relatively shorter than other screws. Nonetheless, they do their job quite well by creating durable fixtures.

  • Fastens into wood properly
  • Offers greater versatility
  • Enhances holding power in particle boards
  • Resists corrosion and enhances durability
  • Not suitable for thicker particle boards
  1. Hard-to-Find Fastener 014973291563 Wood Screw

Creating a variety of furniture with particle boards at home becomes much easier when you have these screws from Hard-To-Find. They are suitable for both exterior and interior applications and can create very strong and durable wood joints. Available in a pack of 100 pieces, they come at a budget-friendly price.

Hard-to-Find Fastener 014973291563 Phillips Flat TwinFast...
Hard-to-Find Fastener 014973291563 Phillips Flat TwinFast...
  • Diameter: No. 8
  • Length: 2-Inch
  • Material: Steel
  • Finish: Black Phosphate

Why Did We Like It?

Measuring 2 inches long, these screws are extremely useful for joining thicker particle boards. Hence, they can be utilized extensively in creating different types of furniture. And much like our previous pick, they have a diameter of #8, thereby enabling better fastening. 

Furthermore, it has a unique black phosphate finish that enhances resistance to corrosion and fluctuating weather conditions. This finish also lends them a dense black color that goes well with any wooden shade

Additionally, the sturdy steel material of the screws is praiseworthy as it provides the required intrinsic strength for making the joints more durable. Finally, the flathead and Phillips cross-drive makes for a tighter fit in all particle boards and also prevents head stripping. 

What Could’ve Been Better?

We were a bit disappointed to find that their tip was less sharp than some of our other recommendations. In simple words, this makes predrilling essential before using the screws, so the time taken for projects might increase slightly. But their efficiency wouldn’t be affected due to this minor inconvenience. 

  • Can be used to join thicker particle boards
  • Useful in making a variety of furniture
  • Provide enhanced resistance to corrosion
  • Enable a tighter fitting in all particle boards
  • Require pre drilling
  1. Bolt Dropper #10 x 1-1/2″ Wood Screw

Here’s another pack of Bolt Dropper screws that we found to be really beneficial for joining particle boards. Designed with high-quality materials, they ensure that the boards are bound strongly and the fixture remains intact over the years. So, let’s have a look at all the impressive features on offer.

#10 x 1-1/2' Stainless Steel Oval Head Wood Screws (100pc)...
#10 x 1-1/2" Stainless Steel Oval Head Wood Screws (100pc)...
  • HIGH QUALITY STAINLESS: These Oval Head Screws are 100% 18-8...
  • HARD TO STRIP DEEP CUT PHILIPS DRIVE: Our screws have deep...
  • GREAT TO KEEP AROUND: Bolt Dropper hardware is great to have...
  • DIMENSIONS: Diameter: #10 | Length: 1-1/2" | Thread Type:...

Why Did We Like It?

What appealed to us the most was the 10# diameter, which is greater than that offered by most screws in the market. This, in turn, ensures strong fastening and reinforced durability. Plus, their truss-head facilitates a tight, snug fit and plays an important role in securing particle boards completely.  

Another benefit is the 1½ -inch length of these screws, which makes them capable of effectively penetrating thicker particle wood pieces. So, making wooden joints for complicated furniture becomes much easier. 

On top of that, these screws are highly resistant to rust, corrosion, and changing weather conditions. Built with solid, marine grade stainless steel, they retain the bright shiny look for the years to come. 

Lastly, the coarse thread running throughout the length gives the screws the much desired bite that users look for. 

What Could’ve Been Better?

Most customers were satisfied with the performance that these screws offered. However, they complained that it took a little longer to drive the screw into particle boards. They also pointed out that it stripped a little bit during use.

  • Ensure strong fastening
  • Offer great durability
  • Penetrate thicker wood pieces effectively
  • Bite into wooden boards firmly
  • Take longer to be driven into particle boards
  1. FastenMaster FMGD003-75 GuardDog Wood Screw

If versatility is a primary lookout for you, this pack of screws from FastenMaster is a reliable choice to go for. These screws have earned a reputation for getting you through your DIY furniture-making jobs smoothly. Each pack comes with 75 pieces and a guarantee for the life of the project that you are using it for.

FastenMaster FMGD003-75 GuardDog Exterior Wood Screw, Tan,...
FastenMaster FMGD003-75 GuardDog Exterior Wood Screw, Tan,...
  • Manufactured in china
  • Easy to use
  • Highly durable
  • Guaranteed for life of the project and ACQ approved

Why Did We Like It?

These screws get their versatility from the truss-styled head and the length of 3-inches. Together, these features allow you to install them with a variety of driver bits, including PoziSquare Drive, #2 square drive, and Philips drive. 

As a result, they can be used for a variety of projects, including pressure-treated decking, building stair stringers and dimensional headers. You’ll also be glad to know that a PoziSquare driver bit is incl

This post first appeared on Homesthetics Magazine - Architecture Art Design, please read the originial post: here

Share the post

11 Best Screws For Particle Board [Reviewed & Buyer’s Guide]


Subscribe to Homesthetics Magazine - Architecture Art Design

Get updates delivered right to your inbox!

Thank you for your subscription