Adealink 6 GPU H81 Mining Motherboard PCI-E Extender Riser Card For BTC Eth Rig Ethereum
- Material:Metal + Plastic.
- Board Size:128x43mm.
- Power Connector: 6 pin power cable.
- Product name:Mining Motherboard.
- Graphics:integrated graphics.
Material:Metal + Plastic
Power Connector: 6 pin power cable
Product name:Mining Motherboard
CPU DIMM Type:LGA 1150
Number of USB port:8
Support disk array: no
Support memory type:DDR3
Supports high speed PCI-E 1x, 4x, 8x, 16x card (but
EXPLOMOS Latest PCI-E Express Cable 1X TO 16X Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card, 60cm USB 3.0 Cable, 4 Solid Capacitors (VER 008S, 6-Pack)
- STABLE and SAFE: 4 Solid Capacitors deliver power to Graphics stably and safely.
- STABLE CABLE: 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
- VER 008S: Version 008S riser kits are the newest and top of the line solution for setting up GPU mining rigs.
- REDUCE MOTHERBOARD BURDEN: 4PIN, SATA and Graphic card 6PIN interface are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards.
- WIDELY APPLICABLE: Suitable for all Window systems, LINUX and MAC.
1. This product is suitable for motherboard with PCI-E slot. Please plug in the power of floppy
drive while using it. Make sure the computer is out of power when you plug in or out the
PCI-E extension cable.
2. The cables inside are specially made. Please do not replace them with other cables.
3. To prevent ruining your computers and other equipment, please find the right end to
plug in the cable.
4. Use old flat cable for Dual core graphics c
The post Adealink 6 GPU H81 Mining Motherboard PCI-E Extender Riser Card For BTC Eth Rig Ethereum appeared first on Tech we trust.