Get Even More Visitors To Your Blog, Upgrade To A Business Listing >>

Peugeot 406 common problems

Peugeot BadgeThe Peugeot 406 was first produced by the French manufacturer in 1995 and remained part of their European range until 2005. It was available in a number of styles and engines including economical 1.6L petrol and more powerful 2.9L V6 petrol models. With saloons, estates and coupe variants, there was something for everyone in this updated version of the 405.

There are still plenty of 406s out there on the UK roads and thanks to the popularity of this car, it is still possible to find many in good working order. However, as with all second hand cars it is best to err on the side of caution. Use our handy guide to make sure that your Potential Purchase is free from faults and that it won’t end up costing you more down the line.

Brake discs

When you are out on a test drive, make sure you check the stopping distances of your potential purchase. If there are any discrepancies or strange feelings coming from the brakes, take a look at each of the wheels. The discs are known to warp and replacing this part may make the economics of your transaction at little less attractive.

ABS warning lightpe

There is a persistent problem with many 406s where the ABS sensor light illuminates incorrectly on the dashboard. If the brakes feel normal under sudden braking and the car does not skid or lock up on the test drive then you know that there’s a fault with the electrics. Whilst this does not affect the overall performance of the car, it does mean that you won’t be able to tell if the ABS does fail. You’re looking at an expensive diagnostic check to get it fixed.

Indicator Stalk

Indicator stalkWhen you are parked up check that the indicators are working properly on both sides. Use the stalk rather than turning on the hazard lights. If you can hear the relay clicking, but cannot see any lights working then you have an issue with the switch gear stalk. This is a fairly low cost problem to fix, but unfortunately it can be quiet fiddly, so you are probably looking at a visit to the garage or Peugeot dealers.


Make sure you insist on starting the engine from cold on your test drive. Many 4 cylinder Peugeots – in particularly 2.0L petrol versions have issues with regular stalling. Avoid these cars by making sure that you check the full spectrum of performance with the vehicle before you part with any of your hard earned cash.


Pop open the bonnet and take a look at the engine. You are looking for signs of overheating around the radiator and the connected pipework, such as rust and worn hoses. If you notice any of these signs then give the car a wide berth as problems with overheating could have led to residual damage to other parts of the engine.

Timing Chain

Make sure you ask the owner of the car when the timing belt was last changed. This part should be changed roughly every 5 years or 60,000 miles. Check the service history of the car and ensure that this part has been replaced as appropriate as you could not only be looking at a costly repair, but failure to replace this part could have caused further problems to the good running of the car.

Want something with a little more oomph than your average small city run-around? The 406 offers a great combination of power, comfort and carrying power creating the perfect profile for family motoring. If you only have the budget for one vehicle and you want reliability and good economy, then you cannot go too far wrong with this Peugeot.

This post first appeared on Latest Blogs From BreakerLink - New And Used Car P, please read the originial post: here

Share the post

Peugeot 406 common problems


Subscribe to Latest Blogs From Breakerlink - New And Used Car P

Get updates delivered right to your inbox!

Thank you for your subscription