SOFTWARE INSTALL STEPS:

ACTIVATION BY DMICOM + WINCE 6

STEP 1 : Learn of how to get to win CE6 from here:

Or by DBOOT VERSION from bellow:

MEDIANAV 4.1.0 DBOOT for accesing the WinCE by USB
Dboot v2 for 4.1.0
Bootloader for 4.1.0
File NK.BIN

MEDIANAV MNI BEST DJEMAN UNIVERSAL TOOL for accesing the WinCE by USB

 Step 3 : Extract Zip & Copy the upgrade.lgu from dboot 1.4 folder

Step 3 : Insert the USB into MediaNav

Step 4 : Press Upgrade to Dboot MN1

[ MediaNav will automatically restart, Don’t unplug the USB ]

Step 5: Upgrade will continue after restart

Step 6 : Power Off & On the MediaNav Using Car Key (after update)

Step 7 : Once Dboot MN1 displayed in bottom left of Medianav , Touch the logo with your finger & Move from left to right

Step 8 :  Press Ok in the screen, to enter Windows CE 6.0

Step 9 : Touch Start, Program & Select USB PHY On

Step 10 : Extract dmicom_beta_1 Zip file and copy the folder into a formatted USB

Step 11 : Connect the USB into MediaNav

Step 12 : Open My Device , Open Drive MD , Open dmicom_beta_1/bin/dmicom.exe

[ Micom Config will open ]

Step 13 : Choose Environment , Choose Fitted option in Rear view cam & Rear loudspeakers

Step 14 : Touch Write ECU config to register the setting

Step 15 : Choose Rearview Camera option

Step 16 : Choose Guideline for x87 in vehicle type for RVC, then Write Guideline

Step 17 : Change RVC Display tempo.time (last option) to 500 [BS= Backspace],
Then Write Tempo.time

by following this article:

Media NAV EVO 9.1.3 change Camera delay 5000 to 500 via DMICOM on WIN CE6 — Lisandru Blog

Step 18: After all above Steps, Press Enregister

[MediaNav will restart automatically]

Completed! Now you will be able so see this on your MEDIANAV MN1

VISUAL AREA VIEW INSTALLATION packs:

NTSC-M mode – A version that automatically adapts to the release video stream NTSC version of the camera – A version that automatically adapts to the camera output video stream in PAL version There are 3 versions but it’s for compatibility with all cameras, if it works at home there’s no reason to try another one.

It doesn’t improve the quality it just allows you to have an image.

It’s up to you to choose the mod you like or/and the one you need Installation by lgu.

Original camera view for version 4.0.6, 6.0.3.MD or 7.0.5.MD Yip, A capture of the original view:

PHISICALLY CAMERA INSTALLATION

Based on the schematics from previous article:

Medianav EVOLUTION EVO II (Car GPS Renault & Dacia) ELECTRIC SCHEMATIC – SOFTWARE VERSIONS – All you need to know — Lisandru Blog

We can take a look on the pin connections and where the wires should goes:

A sample video about it can be find here:

VIDEO TUTORIAL: Cable connection to the OEM monitor MediaNav to rear speaker in Renault Kwid – YouTube

The post MN1 CAMERA ACTIVATE + UPGRADE VIEW without warning or full screen for PAL or NTSC camera 4.x.x or 6.0.3.MD or 7.0.5.MD can be readed on Lisandru Blog.