Get Even More Visitors To Your Blog, Upgrade To A Business Listing >>

How to Fix Brother Printer Connection Failed Error?

Setting up your Brother Printer wireless and the connection to the wireless LAN report is “Connection: Failed” with some error code, then you don’t need to depress. You can easily Fix Brother Printer Connection Failed Error, by just applying some troubleshooting steps. The error means the Brother Printer cannot detect a WLAN access point/router that has WPS or AOSS enabled. The Brother Printer Connection Failed Error indicates various reasons, that wireless network and security setting you entered may be incorrect, wireless access point/router cannot be detected properly, SSID and Network Key are may be incorrect or wireless setting is not activated, etc. As it’s suggested by the Brother Customer support team, this error could be handled with the advanced troubleshooting steps. In this blog, you will take the solutions or steps to solve this error code, so follow the steps which given below to speedily get out this trouble. Or you can approach Brother Contact Number for comprehensive guidance.

Solutions For Fix Brother Printer Connection Failed Error

 Brother Printer Connection Failed Error

Solution 1:- Check Wireless Access Point/Router

Step 1:- Make Sure That WLAN Access Point/Router is Powered On

  • Unplug the power to your wireless Access Point/Router.
  • Wait for 10 seconds.
  • Then plug it back in.

Step 2:- Attempt To Connect to the Internet

You should try to connect to the Internet using a computer with a built-in wireless LAN to confirm the WLAN access point/router works correctly. Make sure that, if you cannot connect to the Internet, the WLAN access point/router may not work.

Step 3:- Put Your Wireless Brother Printer Closer to the WLAN Access Point/Router

Next, you have to notice or take a step to observe your Wireless Brother Printer. Move your Printer to an obstruction-free area, or closer to the WLAN access point/router. (Like Temporarily place your Printer within about 1 m (3.3 feet) from the WLAN access point when you are configuring the wireless settings).

Step 4:- Confirm the MAC Address

If your WLAN access point/router is using MAC address filtering, confirm the MAC address of the Brother Printer is allowed in the filter. You can find the MAC address by printing the Network Configuration List.

Step 5:- Use the Setup Wizard

  • Your Brother Printer uses radio signals in the 2.4 GHz range. The error may occur if your computer is using the 5 GHz range.
  • Use the Setup Wizard from the control panel of your Brother Printer.
Solution 2:- Manually Entered the SSID and Security Information

If you manually entered the SSID and security information (SSID/ authentication method/ encryption method/ Network Key), the information may be incorrect. Reconfirm the SSID and security information and reenter the correct information as necessary.

Check if the SSID, authentication method, encryption method, Network Key (User ID/ Password) configured in the WLAN access point/router are correct.

Solution 3:- Check WPS or AOSS™ Section

Step 1:- Use WPS or AOSS™

To use WPS or AOSS™, your WLAN access point/router must support WPS or AOSS™. Check if your WLAN access point/router has the WPS or AOSS™ symbol as shown below to confirm your WLAN access point/router supports WPS or AOSS™. For more details, about how to access point/router, you can connect with Brother Helpdesk to instant replies and answers.

Step 2:-Configure Your Wireless Settings Using WPS or AOSS™

  • To configure your wireless settings using WPS or AOSS™, you must operate both your Brother Printer and the WLAN access point/router.
  • If you do not know how to operate your WLAN access point/router using WPS or AOSS™, then connect with experienced Brother Printer Customer Care team to get information about your WLAN access point/router.

I hope your issue is fixed.

If you have any issue or doubt to follow the above steps, then give a call on Brother Technical Support Number and all queries are resolved immediately.

Get in Touch Brother Customer Service Number for Online Help

Brother Printer Customer Support

Feel free to contact at Brother Printer Support Toll-Free Number which is a toll-free number and available 24×7/365 days for your help. Through number, you can instantly connect with our team of the Brother Customer support professionals, who are brilliant and competent in dealing any kind of Brother Printer technical issues. The proficient experts will deliver you reliable troubleshooting steps or finest solutions to fix Brother Printer technical issues or error within a defined timeline. Hence, pick your phone now and dial a toll-free number to obtain online assistance for Brother Printer queries.

The post How to Fix Brother Printer Connection Failed Error? appeared first on .

This post first appeared on How To Solve Brother Printer Fax Error 2001 Call 18002138289, please read the originial post: here

Share the post

How to Fix Brother Printer Connection Failed Error?


Subscribe to How To Solve Brother Printer Fax Error 2001 Call 18002138289

Get updates delivered right to your inbox!

Thank you for your subscription