Canon Printer Setup and Installation
The writeup here discusses the most effective method to setup Canon Pixma Pro 100 printer both via the WPS connection method and USB connection method. Here, we have also talked about the network configurations for the Canon Pixma Pro 100 printer. Let’s look at the steps one by one.
Let us discuss the points in detail:
Canon Pixma Pro-100 Printer SetupThrough WPS Connection Method
Canon pixma pro-100 wireless setup process -
Before beginning the process to Setup Canon Pixma pro-100, there are some of the conditions that one must need to meet in order to implement the WPS connection push button method without any hassle.
- Ensure that the access point must contain a physical WPS push button. In case the WPS button isn’t available then redirect to the standard connection method that is detailed in the succeeding sections.
- Ensure that your printer is turned on. Press and hold the icon of your Canon Pixma PRO 100 printer for a few seconds till the printer button light flashes blue. This will take you to the access point. Further, within two seconds after the blue light flashes, press the WPS button.
- Once the connection with the printer is established, the blue light will stop flashing and remain lit afterwards.
Canon Pixma Pro-100 Setup Through Standard USB Connection Method:
These steps will lead you to setup your Canon Pixma Pro 100 via the standard USB connection method.
- Go to the Canon.com/ijsetup to download the printer driver for Canon pixma pro 100 (selected your device MAC or Windows)
a. Window users needs to open My Computer>Download folder. Thereafter, double click on “MSETUP4.EXE” to follow the setup process
c. Mac users: Visit your desktop and double click on the Canon IJ icon. Open the selection window and click on “Setup” option to start the software download process.
- Hit “Next” once the initial screen appears .
- Ensure that printer and power lamp is on and hit “Next”.
- Click on the “Connect to the network” option and hit and click the “Wireless setup using the USB cable”.
- Select the region and hit “Next”. Thereafter, select “Language” and hit “Next”.
- Connect your printer to your computer using the supplied USB cable. A news screen will appear after detecting your printer.
- Now disconnect your printer from your laptop once the new screen appears and hit the “Next” option.
- Carefully match the printer model number and SSID and hit the “Complete” option . Click “OK” and your Canon Pixa Pro 100 setup via Standard USB connection will be complete.
Network settings confirmation for Canon Pixma Pro 100 printer Setup
- Ensure your Printer is turned on.
- Load a sheet of A4 or Letter-sized plain paper.
- You will get to see a [Resume/Cancel ] Press and keep holding it until the power lamp flashes 6 times. After that, release it. You will get your network page printed.
- Carefully check the connection indicating active while referring to the printout. Also, check twice to ensure that the service set identifier is showing the actual name of your wireless network.
Hope this write up benefits you in the maximum possible way while setting up your Canon Pixma Pro 100 printer both via WPS method and standard USB connection method.
Tags
This post first appeared on How To Fix Comman Hp Printer Issues, please read the originial post: here
