Why do cars need an MOT?
An MOT certificate is given to you after your car passes its MOT test. Once passed, it means that at the time of your test, the car met the minimum acceptable environmental and road safety standards required by law to drive it on the road. However, your car still needs basic maintenance to ensure that it is roadworthy for the life of the certificate. An MOT shouldn’t ever substitute as regular car maintenance.
An upcoming MOT test makes many drivers feel a sense of dread and fear, as failing one not only means that their car is no longer legal to drive on the road, it voids the car insurance and can be expensive to rectify. 40% of cars fail their first attempt at an MOT, when could have passed if were properly maintained and serviced - there are a few
simple repairs you can do yourself! However, if you follow this MOT checklist, then you’ve done everything you can to ensure your car has a greater chance of passing first time.
Checklist of what is included in an MOT:
1. Lamps, reflectors and electrical equipment
Make sure your front, brake, rear, fog, indicator, registration plate lights and rear reflectors are:
● Correctly positioned and secure
● Not obscured
● In good condition
● The correct colour (a bluish tinge to front headlights is acceptable)
● Not overly affected by the operation of any other light
● Light up at a single operation of the switch
The same colour, size and shape must emit from pairs of lights.
Both dip beam and main beam headlight aim should be below the horizontal, to ensure it doesn’t dazzle other drivers.
Your horn must sound a continuous uniform note. It must be loud enough to be heard by another road user.
The battery must be secure. It must not show any signs of leaking electrolyte.
Wiring should be secure. Wiring must not be damaged in a way that it is likely to short circuit or become detached.
2. Steering and suspension
During the test, the strength and condition of the
steering wheel will be challenged by pushing the steering in various directions. Steering components will also be inspecting for wear or damage.
Wheels with locking devices will be tested to make sure it only locks when the engine isn’t running.
Cars with power steering must have the minimum level of power steering fluid in the reservoir.
Your vehicle’s suspension components and shock absorbers are checked to find excessive corrosion, distortion and fractures. Suspension repairs are something that should be done by a professional.
During an MOT, the overall condition of the brakes, pedals and levers are looked at, alongside any warning lights.
A brake performance test is carried out to test brake efficiency.
Tyre tread depth will be checked and must not be below the legal limit of 1.6mm. Tyres will be examined for cuts in excess of 25mm, alongside lumps, tears, exposure of the cord and tread separation.
The warning light must operate correctly for vehicles with run flat tyres.
4. Seat belts and restraint systems
Each seat belt and its attachment and adjustment fittings are checked for its security and condition.
5. Body, structure and general items
A general inspection is made of the body, chassis, engine mountings, seats and doors are inspected to make sure that all components are free from excessive corrosion do not have any sharp edges that may cause injury.
Registration plates must be fitted at the front and rear of the car. They must be secure and legible to someone standing 20 metres away. The characters on the plate must be correctly formed and spaced so that they are not likely to be misread.
Vehicle Identification Number (VIN)
Every car must have a legible VIN permanently displayed, either on the VIN plate or on the body or chassis.
The MOT tester will check if a speedometer is fitted and that it can be illuminated. They will also check to see if there are any cracks in the glass obstructing the view of the speedometer.
6. Exhaust, fuel and emissions
The exhaust system is inspected to ensure it is secure and doesn't leak. Vehicles originally fitted with a catalytic converter must have it present.
During the MOT, your vehicle’s fuel system is inspected for leaks. If your tank cap does not seal properly, then your car will fail.
The tester will use a gas analyser probe while the engine is running to test the smoke emitted from the exhaust. Emissions of carbon monoxide and hydrocarbons must fall within the legal limit set by the Euro Emissions Standards.
A visual check for excessive dense blue or black smoke emitted from the exhaust is undertaken. If there appears to be thick black or blue smoke your car will not pass the MOT.
7. Your view of the road
Mirrors and wipers
The vehicle’s rear view mirrors and wing mirrors must be secure and provide acceptable views to the rear and side whilst driving.
Wipers and washers should sweep a wide enough area on the widescreen to give an adequate view of the road
There must not be any damage or obstructions larger than 10mm around the windscreen directly in front of the driver. Within this area but outside of the driver’s view your car will fail if there is any damage or other obstruction larger than 40mm.
Find out more about how to pass your MOT test, and find a local MOT Test Centre Centre with WhoCanFixMyCar!
For more info about MOTs and the checks which will be included during the test, visit http://www.gov.uk/.