I came across a problem that only seems happen on PiAwawre self installs where Dump1090 will not run.
[email protected]:~ $ sudo piaware-status
dump1090 is not running. faup1090 is not running. piaware is running. no program appears to be listening for connections on port 30005. faup1090 is NOT connected to port 30005. piaware is connected to FlightAware. got 'couldn't open socket: connection refused' maybe dump1090 is NOT producing data on port 30005.
Troubleshooting steps included the following:
I tried adding the password again maybe I made a mistake but it didn’t fix the problem.
sudo piaware-config -user username -password
I know the my RTL is recognized by Raspbian.
Bus 001 Device 011: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Bus 001 Device 010: ID 0bda:2832 Realtek Semiconductor Corp. RTL2832U DVB-T Bus 001 Device 009: ID 05dc:a762 Lexar Media, Inc. Bus 001 Device 013: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Tried to Restart PiAware.
sudo /etc/init.d/piaware restart
And looked for any helpful output.
On a forum there was a suggestion about blacklisting a module.
sudo nano /etc/modprobe.d/rtlsdr.conf
Add the line below to .conf.
After making the changes reboot abd run the piaware-status command hopefully your output will change.
[email protected]:~ $ sudo piaware-status dump1090 is running. faup1090 is running. piaware is running. dump1090 is listening for connections on port 30005. faup1090 is connected to port 30005. piaware is connected to FlightAware. dump1090 is producing data on port 30005.