What need to be done when mac is  not working on your device and how we  can change address for mac!

MAC are well built  computers which is accessible on any any operating system such as windows ,mac but it does not mean it is free from errors.When you use MAC then sometimes it does not work in a proper way.You need to fix this issue.

If mac not working then we are describing some steps to resolve this issue.You will have to follow given steps:

• First of all  you need to check  that MAC is turn on or not ,for this you will have to press the power button ,if you do not hear any noise then mac is not turning on.

  • You need to check the power connection and check that mac is plugged in right way.If you are working on laptop then make sure battery is working.

  • You need to try a different power cable or adapter.

  • You will have to disconnect all the input and output device which are connected to mac.

• You will have to perform a power cycle which will force you mac to restart after killing the power.You need to hold down the power key for few seconds.You need to wait to restart your mac.

• You are required to check your display.Sometimes there may be issue in your desktop rather than the mac,if you are not listening any sound during  boot up.

• You need to run disk utility in recovery mode or safe mode option.

• You will have to boot up your mac in safe boot.

• After that you need to check the file system.

• Then you need to reset the PRAM in your mac.

How to change mac address?

MAC Address is used for wired and wireless network both to connect computers as a unique address which we assign to every network interface card.Here are the steps given below to change Mac Address,you need a look on the given below steps:

• you need  to go to the home screen on Windows ,after that  press the window key along with break pause.

• There is another option to  press the Window keys with  Fn and pause key.

• After That  click on the device manager wich will show  at the left side of the window.

• Now go to the  category named network adapters and fill the Network name.

• Here you have to to see all the network cards .

• Now select that MAC address which you want to change.

• Then you have to select  the network adapter properties and click on the advanced tab.

• Enter Six digit value  and click on the radio button.

• Finally you have to close the device manager and other Open dialog boxes.