The flagstone Floor style is still in fashion for its rugged and yet smooth surface. Not to mention the elegance and grace that it holds. They are generally leveled and sometimes difficult to clean, especially when it’s your turn to apply a sealer. We will see all about how to clean flagstone floor in a very easy and detailed manner in the below-mentioned steps.
Things required for cleaning
- Dust broom and Dustpan
- Mop and Bucket
- Cleaner and Water
- Sealer
- A brush
- Gloves
How to clean flagstone floor – Step by Step
Step 1 – Brooming
Step one for Cleaning is to always remove visible trash and dust particles. Swipe all the dust, collect it in a dustpan and discard it. This step is very essential because if the dust particles are present on the floor, the sealer would not give the best results. Plus, doing this makes mopping the floor way easier. So, it’s recommended not to skip this step.
Tips for brooming easily
Brooming is no rocket science but a few tips can help you preserve efforts and be effective. Here are a few tips for you.
Tip 1: Take small strokes
It’s recommended to take small strokes. It will keep the mop in control. With small strokes, the effort put in will be reduced and you will get less tired while brooming. Large strokes will make you more tired and might scatter the debris even more. Avoid being excessively forceful.
Tip 2: Taking care of the broom
Avoid getting the broom wet. It will harm and bend the bristles and reduce its efficiency and shelf life.
Tip 3: In case it still gets wet
If by chance the broom gets wet, simply hang it upside down. If the bristles are facing the ground they won’t go out of shape. Make sure it dries completely before using. It would be best if you could expose the wet broom to some sunlight.
Step 2 – Mopping
Now comes the mopping. Dip the mop in the bucket of water and start mopping in an up-down motion. You can avoid using detergent but a little soap and disinfectant wouldn’t hurt. Mopping the floor with detergent will definitely give you better results than mopping with just water.
Tips for mopping
Here are a few mopping tips to get you through the process by applying optimal efforts.
Tip 1: Mop Condition
The mop should be damp, not drenched. If it is drenched in water it would create a mess for you to handle. Also, it will take longer for the floor to dry.
Tip 2: Things to take care of while mopping
Make sure you rinse and wash the mop several times during cleaning. Change the water after a few rinses for the best results.
Tip 3: floor condition while mopping
Flagstone floors become slippery when wet. So, be extra careful while mopping.
Tip 4: Recommended mop
You can have a look at mops here. This is the best mop I came across. It also eliminates the need to carry a bucket around. Its triangular build lets you get the dust and stains on corners and this is the most basic and impressive feature of this mop.
- HANDS-FREE WRINGING: Our exclusive mop bucket design features a built-in wringer that allows for hands-free wringing while Splash Guard keeps water splash and spray inside the bucket when wringing or when transporting the bucket from room to room
- MACHINE WASHABLE: The EasyWring Microfiber Mop Head is machine-washable and reusable! We recommend replacing the mop head refill every 3 months for optimal floor cleaning results
- DEEP CLEANING MICROFIBER: O-Cedar's EasyWring Microfiber Spin Mop & Bucket Floor Cleaning System uses millions of strands of advanced microfiber to effectively capture dirt and grime with just plain water, eliminating the need for harsh chemicals. Safe for all hard flooring, including finished hardwood, wood, laminate, tile, vinyl and more.
- REACHES IN CORNERS: Due to the patented triangle mop-head and ability to rotate 360 degrees, the EasyWring Mop can reach and clean deep into corners, under furniture, alongside baseboards, and between tile.
- 1 REFILL = 3 MONTHS OF CLEANING: This offer includes 1 EasyWring Refill, and each EasyWring Microfiber Refill lasts up to 3 months! Save time and money with longer-lasting mop head replacements
Last update on 2022-03-02 / Affiliate links / Images from Amazon Product Advertising API
Step 3 – Wait
Wait for the floor to dry completely after mopping. Avoid walking on the wet floor at all costs. Otherwise, you’ll be back to square one with the footprints and dirt on the floor. This is where most people get impatient and head for the next step. Don’t make that mistake. Allow it to dry completely.
While waiting for the floor to dry, you can wrap up the side chores. Wash the bucket and the mop and rinse it thoroughly. If possible leave the mop to dry in the sunlight. It will help with getting rid of the damp smell in the mop.
Step 4 – Floor sealing
First, put on your gloves. Avoid direct skin contact with skin. Take the sealer and take it out in a bowl or any comfortable container. Take out a small quantity and apply it on the floor with the help of a brush.
- HIGH GLOSS COATING: 33% high solid acrylic floor wax & sealer. Quick drying, diamond-like shine
- SAVE TIME: Requires half the coats then traditional floor products. Quick and easy application
- ULTRA DURABLE: Floor finish for long lasting shine with patented polymer technology
- PROTECT AND SEAL: Scuff & Scratch resistant floor finish, for wonderful looking floors
- LABOR SAVING floor finish. USE ON: Terrazzo, Vinyl Tile, Rubber, Concrete, Linoleum, Sealed Wood etc
Last update on 2022-03-03 / Affiliate links / Images from Amazon Product Advertising API
- 1 Piece Big Fence and Stain 1.2 INCH THICKNESS OF PAINT BRUSH 7 inch by thick 1.2 inch Wall brush with 70% polyester and 30% SRT blended bristles can hold more paints than thin paint brush so it is speed wall brush,It’s fantastic for getting paint into spaces easily.how the brush holds paint,it will make painting quickly
- Fence brush 7 Inch with SCREW with extension pole Premium ferrule in blue copper finish for wall brush fence and stain for all paints
- Great quality of blended filaments with no falling off more paint hold 40% than general paint brush
- Synthetic blended bristles For Use With All Paints On All Surfaces Ideal for Marine brush for painting Includes lip to hook the brush onto the edge of paint Can make your painting job easy
- KINGORIGIN since 1878 ,we are focus on and produced premium paint tools from 100 years ,this Fence brush Great job for large area painting works , it will improve and speed for fence and stain working
Last update on 2022-03-03 / Affiliate links / Images from Amazon Product Advertising API
You need to apply three to four coats of this sealer. It’s highly recommended to use separate brushes for separate coatings. Use the same brush for the first coating in all rooms, use the same brush for the second coating in all rooms, and so on.
Sealers are floor coatings that last for somewhere around 3 years in a household. If the wear and tear are high in an area the coating might last for just 6 months as well. It all depends on the floor and its use.
Why seal flagstone floors?
Applying a coating of a sealer will make the floor look shinier, attractive and will become easier to clean in the future. Sealing fills up the gaps, lines and scratches on the floors and hence providing a smoother surface. It also increases traction, giving your floor an anti-skid feature making it safer to walk on and that is why it is fruitful to seal flagstone floors.
Best flagstone cleaner
Any detergent would work fine. All we really need is to get rid of the dust particles and other impurities. If I have to suggest, it should be cleaner which is pH balanced. This cleaner is best for going on a cleaning spree. It’s pH balanced and specially made for all sorts of stones.
Ph balance is important because highly acidic or alkaline cleaners tend to damage the floor and diminish its shine. You can also use diluted white vinegar and bleach for tough stains
- pH-balanced stone cleaner (for marble, granite, travertine, limestone, terrazzo, slate, flagstone and other natural stones)
- Phosphate free and completely biodegradable
- Lavenet requires no rinsing when used properly and does not leave a film on stone surfaces
- Lavenet will not harm any natural stone
- Great for polished, honed and flamed stone surfaces
Last update on 2022-03-03 / Affiliate links / Images from Amazon Product Advertising API
FAQs
How to clean the indoor flagstone floor?
The above-mentioned steps are perfect for indoor flagstone floor cleaning. We have kept the mess that takes place while cleaning to a minimum.
I understand that it is not practical to move heavy furniture like almirah and bed when you clean, but it’s best to place the easily movable furniture and then start cleaning. Doing this might make you think that it will take more time. But it actually reduces the time and cleans much better.
How to clean the flagstone walkway?
As walkways are outdoors, a few things must be kept in mind while cleaning a walkway.
Firstly, make sure the weather is not windy. If so, then sealer won’t give the best results and your walkway will just keep on covering itself with dust.
Secondly, You can let loose. You don’t have to worry about creating a mess if you spill water because it will just go into the soil or grass. You can relax if anything happens. You can simply rinse the floor by spilling water on the walkway. You can use a power washer if you have one.
- Questions, Text 563563 to chat directly with a Sun Joe expert
- POWERFUL: 14.5-Amp/1800-watt motor generates up to 2030 PSI (at initial discharge per CSA internal pressure testing) and 1.76 GPM (with nozzle open at minimum pressure) of water flow
- VERSATILE: Tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment, and more. With two 0.9 L onboard detergent tanks, removable tanks carry and store different types of detergent to simultaneously tackle different cleaning projects.
- TSS (Total Stop System): Automatically shuts off pump when trigger is not engaged to save energy and prolong pump life.
- Max PSI at initial discharge per CSA internal pressure testing. Max GPM with nozzle open at minimum pressure.
Last update on 2022-03-03 / Affiliate links / Images from Amazon Product Advertising API
How to clean a flagstone patio?
It will be safe to treat and clean a patio as almost any outdoor area. As mentioned in the flagstone walkway explanation, look out for windy weather and stop worrying about creating a mess by spilling water. Before doing so, make sure to move all the furniture aside and then start the cleaning process. If possible, go for a power wash. Cleaning with a power washer is surprisingly satisfying.
- Questions, Text 563563 to chat directly with a Sun Joe expert
- POWERFUL: 14.5-Amp/1800-watt motor generates up to 2030 PSI (at initial discharge per CSA internal pressure testing) and 1.76 GPM (with nozzle open at minimum pressure) of water flow
- VERSATILE: Tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment, and more. With two 0.9 L onboard detergent tanks, removable tanks carry and store different types of detergent to simultaneously tackle different cleaning projects.
- TSS (Total Stop System): Automatically shuts off pump when trigger is not engaged to save energy and prolong pump life.
- Max PSI at initial discharge per CSA internal pressure testing. Max GPM with nozzle open at minimum pressure.
Last update on 2022-03-03 / Affiliate links / Images from Amazon Product Advertising API
How to remove wax from flagstone
Wax is an oil-based stain. Various things can be used to get rid of the wax but a few are available at home.
Firstly, scrape off as much wax you can. Then, you can use vinegar, paint thinner or rubbing alcohol for dissolving the leftover wax. If at all possible cover the wax with a few paper towels or a thick paper bag and switch on the iron. Keep the heat at the lowest and let the paper absorb the wax.
Make sure you don’t end up putting wax on the iron surface. Be extremely careful of it.
If you end up putting wax on the iron surface, it is not a cause of panic. The easiest way to remove the wax is to use acetone nail polish remover. Put some nail paint remover on cotton and dab on a slightly hot surface. This time it is essential to use oven mittens. Otherwise, it’s easy to get your hands burned while getting wax off the surface. After this, clean the surface with a damp cloth.
- HEAT-RESISTANT: Our high-quality, high heat oven mitt is cast-iron safe up to 480 °F - so however hot the kitchen, you can keep your cool.
- SILICONE STRIPING: This oven mitt set features an impressive silicone striping that provides a non-slip grip for superior handling.
- QUALITY: Crafted from a combination of silicone and cotton, and lined with a soft terry cloth, our oven mitts for baking provide maximum heat protection, flexibility, and comfort.
- EASY CLEAN: Machine washable and complete with a handy hook, our oven mittens are designed to make your life easier.
- PROTECTION: Measuring an optimum 12.5" in length and available in 6 different colors, these oven mitts will fully cover your hands and wrists.
Last update on 2022-03-03 / Affiliate links / Images from Amazon Product Advertising API
Wrap Up on Cleaning Flagstone Floors
If you follow the above steps and warnings, it should be easy to clean and maintain a flagstone floor. Make sure to be extra careful while mopping and sealing. Every person has unique tolerance levels when it comes to chemicals. So, it is best to avoid any direct skin contact with any sort of chemical. That’s why it is highly recommended to use gloves from the start.
I hope this guide for cleaning the flagstone floor will prove to be useful to you. I have tried my best to present a detailed cleaning journal so that it would be easier for you to conduct your task and you avoid all the mistakes that I made.
Happy cleaning!
People Also Like:
Best Pressure Washer for Cleaning Concrete
How to Clean Pebble Stone Shower Floor
