Crushed rock driveways can offer an amazing rustic look and feel to your home exterior, enhancing the lane for vehicle traffic outside your home without drilling a huge hole in your pockets which is often the case with concrete or brick driveways. However, you must understand that a Crushed Rock Driveway can soon become dirty and form a huge cloud of dust over it after anyone drives on it. Dust is a natural element that comes along with a crushed rock or gravel driveway. However, these are still the finest of choices when it comes to the rocks comprising the materials in the driveway.
You can get the crushed rocks, pebbles, and stones from any reputed and experienced landscaping company that not just provides these kinds of high-quality supplies for the landscape including crushed rocks, stones, pebbles, or Redgum firewood Mornington Peninsula, Melbourne, or elsewhere in Australia but also offers installation and maintenance services of crushed rock driveways. And if you are concerned about the dust, then you must know that with proper care and maintenance, you can reduce the dust on your crushed rock driveway.
Here are a few tips that will help. Take a look.
Regularly Water the Driveway
Generally, crushed rock or gravel driveways are likely to pick up dust when it gets dried up. So, you must try to keep it as damp as possible so that the amount of dust produced on the driveway will get reduced to a minimum. You will not need a lot of water but just sufficient enough to keep the top level moist. So, if it is already humid, you should just apply water once every few days. But in hotter and drier summer months, the water will be evaporating sooner after you apply it, so you have to repeatedly continue the process twice or thrice in a day. This will keep the dust controlled to some extent.
Get Expert Help for Proper Drainage of the Standing Water
Water will help you control the dust but standing water can have the opposite impact on it. It can form depressions in the surface due to wear and tear or an improper drainage owing to poor installation, which further brings these small dust particles from between the gravel and deposits them on the surface after the water dries up finally. These particles later become dust when these are disturbed and evaporated into the air. So, you need to be careful with the usage of water while maintaining the driveway. It is better to hire a crushed rock driveway maintenance company for this task.
Apply Salts or Binders by an Expert
The easiest and most effective solution that you can try for controlling the dust on gravel driveways is using an element which will absorb the water or make the dust denser. Salts like the calcium chloride will absorb the water from the air and from under the road, ensuring a damp top for the gravel driveway, thereby decreasing the amount of dust. You can also try binders like resins, emulsified asphalts, bentonite, or sulphonated petroleum etc which will attract the dust particles to each other, forming bigger pieces of dust which are not quite likely to fly into the air if disturbed. But since the application of these salts or chemicals is not quite easy and must be applied evenly, you need to hire experienced and well-trained contractors for this.
So, what are you thinking? Follow these tips and if required, look for the right landscaping company offering driveway maintenance services.
Author Bio: Annie Hall, a regular blogger on landscaping supplies like redgum firewood Mornington Peninsula or landscaping services like crushed rock driveway maintenance or earthmoving, here gives us 3 tips on how to reduce dust from your driveway.
The post 3 Tips on How to Reduce the Dust on Your Crushed Rock Driveway appeared first on Blog | HireField.