About The Ram-Professional Countersink Drill Bits Package
So you’re building any venture at your property workplace or workshop & you want to these screws, Nails or Bolts to be flush mounted flat with the floor so they will not stick out, so you’d countersink the screw holes.
Package additionally consists of stop collars for controlling drill bit depth to a exact setting.
It is advisable to make use of drill collars with a lubricant to stop burning of the fabric floor.
Each the Countersink bits & the collars have hex nuts for straightforward adjusting tightening & correct positioning.
Package comes with the Right Allen Wrench for tightening the nuts.
Nice for hinge, Stair guide case, espresso desk, chair, cupboard, closet, wall, desk, mattress, kitchen, bed room, workplace, studio, dresser, bench.
Countersink may additionally be used to take away burr left from a drilling/tapping operation thereby enhancing the end of the venture & eradicating any hazardous sharp edges.
(Countersink in contrast to counterbore makes a cone formed gap whereas bore produces a Flat-backside rounded gap.)
• 7 Drill bits
• 7 Countersink bits
• 7 Stop Collars
• Allen Wrench
Bit Sizes are carved on the bits for clear identification which bit for the right screw.
Works with all varieties of wood/lumber: Plywood, Pine, Oak, Birch, Mahogany, Maple, Cedar, Fir, Cherry, Poplar, Alder, Ash, Walnut, Hemlock.
A should have for each woodworker & carpenter.✓ The Ram-Professional Countersink & Counterbore Wood Drill Bit Package pre-drills holes and countersinks even hardwood and aluminum, thereby decreasing the danger of splitting the panel, and giving each screw nail or bolt a pleasant look because it seems flush with the furnishings’s floor, and might be coated properly with picket plugs.
✓ SPECS: 7 Countersink four-Fluted Bits with 7 Hex adjustable Depth Stop Collars, Suitable with Screw Sizes: #5, 6, 7, eight, 9, 10, 12. – Bit sizes: 1/eight”, 9/sixty four, 5/32, eleven/sixty four, three/sixteen, thirteen/sixty four, & 7/32 inch – Allen Wrench: three/32″ diameter.
✓ DESIGN & QUALITY: No Extra Splitting Woods! The Final 2-in-1 countersink drill bit design Made of excessive velocity warmth handled Carbon Metal so the bits have sharp ideas and are capable of maintain by means of warmth and strain with out breaking/shattering and damaging the panel or beam you’re building – Bit sizes are carved onto the drill bits for identification.
✓ NICE APPEARANCE: The drill bits drills pilot holes properly and precisely with precision time and time once more getting a exact cone formed gap on every burr, in consequence you’ll get a pleasant clean floor on any sort of hard, tender wood or aluminum.
✓ USES: Connect to any Power Bench or Hand drill driver – When Woodworking or Constructing Molding, enlarge and bevel the rim of a drilled gap so that a screw, nail, or bolt may be inserted flush with the floor you’re engaged on, Instance: Hinges – the bits additionally wipe away any burr left from any software, thereby enhancing the end and eradicating hazardous edges.
This post first appeared on Woodworking Made Easy - Tips, Projects, Plans And Video, please read the originial post: here