If you have got some trouble with your small Engine equipment and thinking of troubleshooting the problem on own, this post will be of great use. Here you will read about some of the most common issues small engine machine repair services in Hopkinton fix every year. Let’s read on.

Engine isn’t running

Most households face this problem when they use their small engine equipment like a lawn mower, lawn trimmer and chainsaw first time after long winter storage. And some most common causes are mentioned below.

A Quick Tip: Read the user manual of your small engine equipment carefully before you start diagnosing, servicing or repairing the equipment on own. And don’t forget to unplug the spark plug. This is vital to avoid physical injury. And if you are uncertain of correct procedure, consult a small engine repair specialist in Hopkinton.

• Degraded Fuel: First of all, check if your small engine equipment is filled with the minimal required quantity of fuel. If it’s empty, top it up with fresh fuel and start the engine. If the equipment already contains fuel in the tank, you need to check if it is clean and fresh. If the fuel contains debris or if it is stale, it will prevent your equipment engine from starting. Using your small engine with contaminated fuel can also cause significant damage to the engine. This is why it is important to be aware of the correct methods of winter storing your outdoor power equipment. If DIY attempts doesn’t do any help, it is a good idea to visit your nearby small engine repair shop in Hopkinton immediately.
• Jammed carburetor: If the carburetor on your small engine machine is clogged up by debris or damaged, it can cause engine starting problem or severely impact engine’s performance. Sometimes, simply cleaning the carburetor can help you start your engine successfully. 
• Loose spark plug: Your small engine equipment may not get started if the spark plug is loose, clogged up or inappropriately gapped. Even fitting a wrong type of spark plug on your outdoor equipment can cause troubles starting its engine. Spark plug is a major component of your equipment’s ignition system. And thus any issue with the spark plug will stop the machine from running. You need to change spark plug after every 25 hours or at the beginning of the new season. Set the correct spark plug gap, as mentioned in the manufacturer given manual. 
• Leaking valve: The compression system of your small engine machine is made of two valves (intake valve and exhaust valve), piston, rings and cylinders that together control the fuel and air mixture passes through the engine. If there is a leakage in any one of the valves, it will keep your small engine from running.

Engine isn’t running properly

• Engine stalls and runs rough: Your engine starts but then stalls or run inefficiently. This can be an outcome of lack of standard maintenance. Get your equipment inspected by a pro at a local small engine repair shop in Hopkinton. A professional tune-up or repair service, if needed, will make your outdoor equipment run efficiently. 
• Stale fuel and oil: Never keep the gas or fuel stored in the equipment for longer time. Make use of fuel stabilizer to keep gas from breaking down for longer time.  Similarly, you also need to change oil at end of season or after 25 hours of usage. Make a habit of checking oil’s appearance and level before you use the equipment. 
• Dirty filter: First you can try cleaning the air filter and see if that fix your engine problem. If not, change the filter. This won’t cost you big. 
• Foul spark plug: Check if the plug isn’t disconnected. If required, you can try replacing the old plug with a new one and see if it addresses the problem.

Engine is overheating & smoking

Check the engine oil level if it isn’t too low. In some cases, simply removing the debris from fuel tank vent and cleaning other parts of the engine help stop engine overheating. If your engine is blowing blue or white smoke, it indicates the engine is burning oil. And if it is emitting black smoke, you need to check carburetor setting. If the problem persists, take your outdoor power equipment to a professional small engine repair service in Hopkinton.

Engine is knocking

Factors like faulty spark plug, loose flywheel and higher amount of carbon in combustion chamber of the engine can cause engine knocking problem. Unless you have ample experience and knowledge of repairing small engine equipments, it is recommended to let the small engine repair specialist look into the matter.

These are some of the most common problems fixed by small engine repair shops in Hopkinton. No matter what kind of problem your small engine machine has, a professional repair service has the right skills and tools to diagnose the exact cause of the problem and fix it in minimal time.

Source: http://metrowestlawn.tumblr.com/post/157520224642/most-common-problems-encountered-by-small-engine