This article is all about Best NVME M.2 SSD for Gaming. There are a lot of companies present in the market that are experimenting with the old SSDs that are being used in our computer systems and trying to bring better versions with the advanced technologies present in modern times.

What is NVME M.2 SSD?

NVMe stands for the Non-Volatile Memory Express and is the latest industry software for PCIe SSDs. Nvme is a layer between the device driver and the PCIe device, that standardizes the rules with emphasis on lower latency and security.

Why Choose NVMe M.2 SSD?

The NVMe M.2 SSD should be your choice because of the increased read and the speed that it provides compared to the other versions. The NVMe M.2 SSD provides a read and write speed of 7 GB/s and 6 GB/s and even more with some NVMe’s.

Size

The size of the NVMe M.2 SSDs was 500 GB and 1 TB with the 3rd Generation but a significant change has been seen with the 4th Generation as the size has been increased to 1 TB and 2TB.

Must Read – AOC 24G2 Gaming Monitor Review | 144Hz Gaming Monitor 

Speed

The speed has also been affected by the new NVMe coming to the market. The 4th Generation NVMe has doubled the speed compared to the 3rd Generation NVMe’s.

TBW (TeraBytes Written)

The SSD write endurance is described in terms of TBW (TeraBytes Written). With the increase in size and speed, the endurance of SSD or the TBW has also increased.

Hardware compatibility

The present-day NVMe M.2 SSDs are highly compatible these days. Most of the high-end systems nowadays come with the 4th Gen NVMe M.2 SSDs.

Must Read – How To Connect Bluetooth Headphones To PS5 | PlayStation 5

Power Efficient

As the initial SATA disks and SSDs use to costume a lot of power to work, it is not the case with the new M.2 NVME SSDs. The new ones are more power-efficient.

Performance

With increased speed, power efficiency, hardware compatibility, and larger size, the new NVMe M.2 SSDs show a really enhanced performance.

Recommended – Nintendo Switch Account Protection | Say No to Hackers

M.2 NVME SSD VS SATA SSD

There is a huge difference between the read and write speeds of M.2 NVME SSD and SATA SSD. The SATA SSD’s theoretical speed is around 750 MB/s whereas the latest NVMe M.2 4th Gen SSD can provide a speed of 7500 MB/s, 10 times more than the SATA SSD. By this only we can evaluate all the difference between the two SSD’s.

NVME Gen 3rd VS NVME Gen 4th

The basic difference between the NVME Gen 3rd and NVME Gen 4th is their read and write speed. The NVMe 3rd Gen can provide a read and write speed of 3500 MB/s whereas the latest NVMe 4th Gen can provide a speed of 7000 MB/s, nearly double of the 3rd Gen.

5 Best NVME M.2 SSD for Gaming

There are a lot of NVME M.2 SSD for Gaming available in the market. You can from the long list available, but if you want to go for the best drive then there is a list of 5 drives given below that can help your system do wonder.

Must Read – 5 Steps to Find Steam Purchase History in 2021

Samsung 980 Pro 4th Gen

In the year 2020, Samsung has released its first PCIe Gen 4 SSD for clients named as Samsung 980 Pro. The dominating result of this drive can be seen in the VDBench tests as it is one of its kind. The only small fault that the users saw was the limitation in the on high the capacity went and that also for resolved when its 2 TB variant came out. As the storage is only updated in the second variant, there are also some key features that might want to have a peek at.

The Samsung 980 Pro SSD leverages the PCIe Gen 4*4 interface allowing it for reading speed of up to 7 GB/s and write speed of 5 GB/s. Also, random throughput of up to 1 Million IOPS can be seen. The drive has Samsung’s sixth-generation V-NAND, and the SSD also utilizes the enhanced TurboWrite 2.0 Technology, which delivers upwards of 5 times the buffer size.

Corsair MP600 4th Gen

This new upgrade by Corsair has its own advantages with the provision version and it tuned out to be a performance-enhanced product to its predecessor. The higher performance claim in this drive includes the Read speed of 7 GB/s and the write speed of 6.55 GB/s for the 2 TB capacity. The MP 600 4th Gen is an M.2 2280 form factor that fits in most of the rigs assuming there is room for the heat spreader. This drive is made specifically keeping in mind the needs of gamers and creative professionals. Like its previous variant, it also comes with a large heat spreader. Also, there is a Hydro X version that takes the game on a whole new level with liquid cooling across the water block. The Corsair MP600 4th Gen leverages 3D TLC NAND for both better performance and endurance.

GIGABYTE AORUS M.2 NVME SSD 4th Gen

Typically the fastest PCIe 3.0 NVMe drives(the previous version) averaged Read and Write speed of around 3.5 GB/s but with the latest GIGABYTE AORUS M.2 NVME SSD 4th Gen you can get the Read and Write speed of 5 GB/s. The form factor of the drive is M.2 2280 with a limited warranty of 5 years. Gigabyte has outfitted this drive with a massive 70 gram all copper heatsink. Not only the look is good but it does keep the temperature in check.

The drive-through tests do get heat up but you won’t notice any throttling as there isn’t any. The more impressive part about this drive is that it has a massive endurance rating of 3600 TBW(TYerabytes Written). Most of the drives present gives you 1200 to 1500 TBW but 3600 TBW is a whole new level thing.

Sabrent 1TB Rocket Nvme SSD

Now we see that with the introduction of PCIe 4.0, we have seen the storage speed take a massive jump. The Sabrent 1TB Rocket Nvme SSD claims a Read speed of 5 GB/s and a Write speed of 4.4 GB/s with throughput as high as 750K IOPS. This speed only comes with a newer motherboard of the modern times, with the older motherboards the Read and Write speed gets significantly dropped up to 3.4 GB/s and 3 GB/s.

Check: GTA 6 Release Date, System Requirements, Rumors, Locations

The Sabrent SSD also comes with some decent endurance numbers as well, 1.2 Million hours MTBF and up to 3600 TBW. There is also a custom heatsink available for those who need maximum performance and don’t want to worry about heat generation slowing their drive down. This heat sink is a combination of aluminum and copper and is very easy to install. The Sabrent SSD  is backward compatible with PCIe 3 motherboards.

WD BLACK SN850 M.2 NVME SSD

From our analysis, we see that the drive comes in an M.2 2280 single-sided form factor with an NVMe flash controller, a DRAM chip, and just two flash packages because of the large size of the controller package, measuring 17*17 mm, and taking up most of the PCB space. To power the SSD, WD uses a proprietary Arm Based multi-core eight-channel PCIe 4.0*4 NVMe SSD controller that leverages a micron DDR4 DRAM chip to deliver the required responsive performance.

Recommended – Acer XF240H Color Settings | Acer 144hz Monitor Settings

The WD Black boasts cutting-edge PCIe Gen 4 performance and is available in up to 2 TB of capacity. The WD Black SN850 is a beast of an SSD that rivals Samsung’s 980 Pro for the best SSD. If you are willing to purchase it, you shouldn’t think more as it is a great choice for gamers and enthusiasts for top-tier quality storage.

What is PCIe NVMe M.2 SSD Adapter?

The PCIe NVMe M.2 SSD Adapter is a small form factor solid-state drive that is used in internally mounted storage expansion cards These adapters are designed to enable high-end performance storage in thin, power-constrained devices such as ultrabooks and tablet computers.

Must Read – Witcher 4 Release Date, System Requirements, Trailer & Rumors

How to Install M.2 NVME SSD?

It is often seen that the faster is the Hard Drive, the faster can be read and written thus speeding up all the aspects of your computer experience. The first thing to remember is to always work in this area with an anti-static wrist band on. Start by opening the system and locating the M.2 PCIe slot. You have to look carefully as the M.2 PCIe slot looks small and compact.

Install the motherboard standoff screw based on the length of your M.2 SSD drive. With standoff screw in place, gently slide in the drive into the M.2 slot. Use a small amount of pressure to put in and not force it. Push down so the SSD is flush with the motherboard and sitting on the standoff mount screw. Tighten it until it’s snug and no need to apply pressure.

FAQ 1: Can you purchase an m.2 SSD without NVMe technology?
Answer: Yes, you can purchase an m.2 SSD without NVMe technology.

FAQ 2: Does NVMe need a heatsink?
Answer: Yes, NVMe does need a heatsink because in your regular days work though you are not putting more pressure, the NVMe in normal working condition also will heat up. So, the heatsink becomes an essential part.

This is all for Best NVME M.2 SSD for Gaming. Now choose the best M.2 SSD for your gaming PC and feel the power of M.2 SSD. If you are new to OMGGamer then don’t forget to subscribe to our newsletter which is given down below.