If you are a truck Driver who needs to transport dangerous loads, there is no doubt that the safety of both your vehicle and the cargo must be at the forefront of your mind. Although it may seem like an easy task, without proper training it can quickly become unsafe.
A truck carrying dangerous goods on a narrow highway will have many other vehicles around it and if anything were to happen, such as sudden braking or an accident, these could lead to disastrous consequences.
The importance of Heavy Vehicle driver training cannot be overstated for those in this field- not only does it prepare drivers for any situation they might face on their journey but can also help protect themselves and others from possible injury or even death!
In this blog post, we'll be looking at the importance of heavy vehicle driver training to be able to transport dangerous loads safely.
1. Ensure that the load you are carrying is not over-sized
This is one of the first things that every truck driver needs to be aware of. Over-sized loads can cause a safety risk for the drivers and other people on the road, so it's important to know how much you can safely carry before attempting this type of move.
Loads over 150 centimetres in height have restrictions imposed by law because they are considered too tall for safe driving under some conditions. They may also not fit through certain types of bridges or tunnels if the load is taller than these structures' clearances while passing underneath them.
Many trucks cannot hold more than one such load at any given time due to their limited carrying capacity, which means that overloading poses an increased risk.
2. Slow down at intersections and be cautious of other drivers on the road
Drivers should be vigilant for upcoming intersections and slow down gradually to avoid fatal crashes. Avoid tailgating other drivers or making sudden lane changes, which can lead to loss of control on the road.
In fact, many accidents happen when drivers are turning left. Drivers should have more space to turn-left and be aware of other crossing traffic from either side.
Before you start your vehicle again after stopping at a stop sign or red light, make sure that the intersection is clear before proceeding cautiously through it. The truck driver will need to know how much weight he can put on his breaks if there is an emergency brake situation during heavy braking for intersections.
3. Keep your vehicle in good working order to avoid any breakdowns or accidents
Keeping your vehicle in good working condition is important for every driver. You not only need to keep your vehicle in good condition but also drive safely and obey the road rules at all times – this will ensure that you deliver heavy goods or hazardous materials as quickly and safely as possible.
Chris Shilling Transport Training teaches drivers how to handle these dangerous loads, with truck training in Newcastle being a popular choice amongst many companies including retailers such as big supermarkets, manufacturers of chemicals, builders who use building supplies like cement etc.
In some countries they have strict importation requirements and more recently the mining industry has become aware of the importance of considering their trucking needs when transporting minerals back to mines after exploration sites are found within remote areas.
4. Stay away from high-traffic areas during peak hours
Peak hours refer to the time when traffic is most congested. This usually happens during rush hour, but it can also happen in other situations like before or after a sporting event. When you're driving along and suddenly find yourself stuck in bumper-to-bumper traffic for miles on end, then chances are this is peak hours of your drive.
We recommend staying away from these high-traffic areas at all times because there's a lot more risk involved with heavy vehicles that can't move as quickly through traffic due to their size and weight. If you do need to travel near one of these locations, try taking alternate routes so you don't have to get caught up in the congestion which could lead into an accident if another driver reacts poorly to being stuck in traffic.
Traffic patterns can change suddenly so it's always best to have a backup plan ready, and drive with caution (and patience!) when you find yourself stuck near these congested areas.
5. Avoid driving behind large vehicles where possible
Most drivers tend to drive behind large vehicles like trucks so they can stay in the truck’s blind spot. This is not advisable as it could lead to a collision when the vehicle tries to change lanes or manoeuvres at intersections.
They should also avoid following too closely, which may cause air turbulence from their draft and affect braking distances if necessary. Should keep a safe following distance of at least four seconds.
A truck driver should be aware that the presence of a heavy vehicle in front or behind could affect their own braking distances, so it is important to maintain a safe following distance.
6. Driver should have a proper training in handling heavy vehicle transport
Having a proper training in handling heavy vehicle transport is important. Training helps in understanding the risks involved and how to minimize them. The truck training will cover topics like:
- Driver training course
- Dangerous goods regulations
- Transporting dangerous goods safely on public roads
- How to deliver dangerous loads safely
That is why at Chris Shilling Transport Training, we not only teach our drivers about the regulations, but also create a safe and reliable work environment.
Chris Shilling Transport Training offers heavy vehicle driver training to people seeking new career opportunities in transportation industry. We are one of the best heavy vehicle training company in Newcastle with years of experience delivering dangerous goods safely on public roads using proper trucking techniques. Contact us if you want to know more!