Engineers are looking for a way to continue using Curiosity's drill after a 10-month hiatus, but restoring the drill will probably take several more months.

It's hard to place a repair call when your hardware is on Mars. Never mind the several-minute time delay between worlds — the difficulty of the call is just part of the lengthy process that occurs when equipment breaks down in the harsh Martian environment.

Now, engineers at NASA's Jet Propulsion Laboratory (JPL), located in Pasadena, California, have announced a possible solution to deal with the balky drill mechanism that has plagued the Mars Science Laboratory (MSL) Curiosity Rover since late last year.

A Problem, and a Potential Solution

Curiosity has drilled for samples of Martian rock 15 times since it landed in Gale Crater via a dramatic sky hook landing on August 6, 2012. In a usual drilling scenario, Curiosity placed two contact posts on either side of the target rock while the bit was still retracted. Then a motorized feed mechanism, located on the end of the robotic arm, extended the bit forward. The drill relied on the posts for stabilization while the bit's torque and percussive action worked its way into the rock.

Problems began in December 2016, when the feed mechanism became unreliable. The drilling operations halted at that time, and the cause of the underperforming mechanism remains unknown.

Engineers looked for workarounds for the erratic mechanism, but in the end they decided to look for ways to use the drill without using the mechanism at all. To do that, they tested alternative drilling methods on a rover replica left here on Earth for exactly this purpose.

One possible solution they found is to use the robotic arm itself to directly push the drill bit into the rock. That way, the bit can remain extended. Normally, the arm's torque sensor would halt arm motion for the day if it detected an excessive counter force. However, in the new drilling mode, the torque sensor instead helps compensate for side loads, which would normally be taken up by the forward contact posts.

This sort of free-hand drilling is similar to what you might do working on your deck, but it's not easy. "We're replacing the one-axis motion of the feed mechanism with a [robotic] arm that has give degrees of freedom of motion," says Klein. "That's not simple."

JPL engineers have also used the rover replica to work up another way to deliver drilled samples into the laboratory-instrument inlets on Curiosity's deck without using the drill's feed mechanism.

“We're steadily proceeding with due caution to develop and test ways of using the rover differently from ever before,” says Steve Lee (NASA JPL) in a recent press release. “Curiosity is continuing productive investigations that don't require drilling.”

After extensive testing on its earthbound twin, Curiosity conducted a brief test of the new method on October 17th, touching its exposed drill to the Martian surface for the first time this year. During the test, the drill pushed slightly downward, then sideways, in an effort to measure forces against the arm mechanism.

Onward and Upward

Drill problems haven't prevented Curiosity from doing some good science. Currently nearing the top of the 20-story-tall Vera Rubin Ridge on Mount Sharp, Curiosity examined the distribution of iron-oxide hematite to confirm that a lake filled the Gale Crater region billions of years ago. The rover has even stumbled across the odd meteorite dotting the Martian landscape.

Originally slated for a 687-day (669 Martian sols, or one Mars year) primary mission, you can expect NASA to get as much science out of Curiosity as possible. Thus far, Curiosity has dealt with a stubborn drill, chewed up tires, and a computer memory glitch. But its plutonium-238 power source has an 88-year half life, and that should keep the rover chugging along for decades to come.

And of course, lessons learned from Curiosity will be paid forward to its upgraded twin, the Mars 2020 Rover. Set to launch in July 2020, NASA's next Mars rover will land via a sky crane landing over one of three finalist landing sites.

Watch for drilling operations on the Red Planet to resume in the coming months, with more great science ahead.

The post Curiosity Tests Workaround for Its Balky Drill appeared first on Sky & Telescope.