If you don’t want your marijuana patches getting busted, you have to make sure people can’t see them! Today we’re gonna learn about a guerilla Grow method we call the Cage.
This technique can be adapted to a variety of different sized outdoor guerilla marijuana patches, but I will show you how to build our standard 4′ x 10′ caged guerilla patch as an example. This is ideal for growing close quarters in thick vegetation such as a grass or crop field or and relies on our previous grow tip that you can find here – Hawaiian Grow Tip #1
Cut four sticks from the bush around 2″ thick. You want the height of them to be slightly lower then the surrounding vegetation as to avoid being seen. Then stake them sturdily into the ground at the four corners of your patch.
Now you will get some welded Wire or scrap fencing to perimeter your patch with it, wrapping the fence to the outside of your sticks. This will keep critters from getting in to your patch and messing it up. Adjust the height accordingly to the local fauna (we keep them short in Hawaii, because we only have to worry about pigs). Be sure to fasten the fencing to the sticks with wire or tightly fastened rope.
Time for the lid. For this you will need a 4′ x 10′ section of preferably old Welded Wire fencing that has lost its shine. You don’t want it to stick out, so rusty wire is ideal. Now raise this up to the top of your four sticks, this will be the top cover piece. Have the sticks to the inside of the wire at the corners of the peice and fasten tightly with thin non-flashy rope or a cut strand of rusty wire.
Most importantly, camouflaging your patch. Cut pieces of the surrounding vegetation and weave this in to your wire. It will make a nice camo netting – even tie pieces of the bordering living vegetation on to your wire. It will stay alive and break the outline of your spot. The amount you use to cover up is your own preference, you will lose more light the more you add….but losing a bit of light is a lot better than losing all your plants. I weave quite a bit of grass in at first, it will open back up naturally as the grass dies and weather gets to it. Walk a ways away from your patch. Does it blend in good enough? Will this easily be spotted by helicopters or hunters?
There you’re done! This example size is meant to fit about 3 – 6 hybrids maxing out at around 6 feet or so. Once the cage is built, you can reuse it again and again enjoying multiple harvests. The main appeal of this technique is that you don’t need to hide your plants under trees in shady areas. Your plants will be hidden and safe out in the middle of a field in full sun!
The post Hawaiian Grow Tip #2 appeared first on Mold Resistant Strains.
This post first appeared on Best Outdoor Marijuana Seeds And Strains - Mold Re, please read the originial post: here