Want weed clone cuttings rooted fast? A cloning machine is your best answer. Grow healthy ready-to-plant clones quick and a virtual 100% success rate using an aeroponic cloning machine.
Products for sale are on top, and the FAQ section is down below. If you have any other questions to add, please leave a comment!
#3 Clone Bucket
The Clone Bucket is a super easy way to make healthy rooted clones fast. Yes it comes with the bucket. Follow the directions carefully and achieve a ~100% rate of success.
An aeroponic misting design, set up the water pump inside and plug your cuttings into the top with the provided inserts(reusable). Turn on the pump and leave it on nonstop for best results.
The affordable price of the Clone Bucket makes it a great product for at-home growers. This user friendly 8 clone site model is perfect for smaller scale cultivators, but you can also step it up to their 18 clone site version for more serious volume.
►Buy it now on Amazon
#2 TurboKlone Aeroponic Cloning System
A bestselling herb cloning machine, TurboKlone features a unique fan system built in to provide oxygen and combat high temperatures that can be detrimental to roots.
This aeroponic cloner keeps cuttings suspeneded while the misters inside continually spray their root-zone. A reputable quality product in the growers community, TurboKlone is not as cheap as other options, but is worth it’s weight in gold.
Features 24 holes with plug inserts included, plus the whole shebang needed to get it running and make you some clones quick. Round edges makes cleaning easy.
►Buy it now on Amazon
#1 Clone King Aeroponic Cloning Machine
Highly reviewed by tons of growers, the Clone King Aeroponic Cloning Machine is top-notch quality at a surprisingly affordable price.
100% success rate when the instructions are followed. Don’t believe it? Give it a try for the cheap price and you’ll never look back. Comes with a 13 head mister, pump, plugs for cuttings, and everything else you need to get started.
This true aeroponic cloning machine uses misting to constantly provide the right conditions for roots to grow from cuttings. Feed purified water and leave the pump on 24 hours a day.
Available in 25 site, 36 site (most popular) and 64 site sizes, to accommodate different volumes of clones.
►Buy it now on Amazon
Why should I use a machine for cloning?
Before cloning machines, cultivators propagated cuttings by sticking the fresh-cut clones into an aearated spongy medium. i.e. Rockwool, J. cubes, vermiculite, coco, ect. These are kept moist manually, by you.
Maintaining both aerated and moist conditions is a small space between rot and wilt for delicate cuttings. Forget about a trip to the beach. Taking care of fresh-cut clones means continually checking and adjusting for the right conditions throughout the day. Easy for some, not for others.
Frequent misting by hand, monitoring the medium, and playing with humidity domes are some of the jobs of manual clone production. Make the wrong move and be left with wilted, brown rotted stems instead of the prized clones you were counting on growing.
Step up to an automated cloning machine – cut out the risks & challenges of other methods.
If you aren’t experienced in clone propagation, don’t have the time to care for them enough, or wouldn’t like to gamble on success, then a cloning machine is for you.
What are the advantages of using a cloning machine?
Put away the humidity domes with a cloning machine – as long as the relative humidity(RH) of your room is around 60% or more, plant cuttings will do best in the open air. No fans or wind on them. Besides that just make sure your water is good(read below) and the machine is clean. Easy enough. Once you get the hang of using cloning machines, getting a near perfect success rate is not that hard!
The neoprene plugs in a clone machine are reusable. Roots produced in a cloner are healthy, thick, and transplant easily anywhere: soil mix, hydroponic and aeroponic growing methods.
How does an aeroponic cloning machine work?
Plant cuttings(fresh-cut clones) are suspended in a closed fixture. The stems are held up above in circular neoprene inserts. The roots, or soon to be roots, are sprayed constantly inside the fixture by an oxygenated aeroponic mist – provided by misters that lie in the bottom. An evenly-controlled mist helps roots emerge quickly from cuttings.
In most models, a cloning machine includes:
- a fixture with a lid
- water pump
- power adapter
- water reservoir
- neoprene inserts
The submerged pump drives water and/or nutrient solution into the spray misters that release the mist. These are pieced together into a ‘machine’ that runs non-stop, taking care of your clones’ most delicate period automatically.
Forget using rockwool, foam cubes, coco coir, vermiculite, or other branded ‘plugs’ – a cloning machine outdoes virtually all the other options. Why? The secret lies in the highly oxygenated mist provided to cuttings: maximum aeration plus the right amount of moisture equals rapid rooting.
Do I need to buy a timer?
Here’s from EZ-Clone:
And here’s what the Clone King has to say about that:
Still certain growers stand by running theirs at timed intervals. All of the cloning machines described in this article can be left on 24/7 (without a timer) and yield a ~100% success rate.
The best water quality for rooting clones?
Water quality is crucial when using a cloning machine for your cuttings. Make sure your water source is clean! Spring water, purified, reverse osmosis (R/O), or fresh rain water are all good options. Best pH levels for the water is 5.7 – 6.5.
If using natural collected water: some water sources can contain algae and other particles that will clog up the aeroponic cloning machine sprays. Easy fix: clean water with a drinking filter.
Growers using tap water should make sure also that there’s no hidden contaminants (like flurosilicates, chlorine or chloramines) that can damage your fragile weed clones. 9 times out of 10 standard tap water will do the job… unless you’re in LA..
What is the right water temperature for clone machines
It is crucial to keep the water reservoir relatively cool – optimal water temp is between 68 and 72 degrees. Use a tank thermometer to monitor your water temperatures, and if it is getting too warm, consider moving the cloning machine to a cooler area.
Running the water reservoir too hot can be problematic, and you will have to add hydrogen peroxide or a few drops of bleach to stop unwanted bacteria forming (a common problem with aeroponic cloning machines). As ol’ Ben Danklin famously said: An ounce of prevention is worth a pound of cure.
Also, you do not need to change the water in the reservoir during the propagation process. Simply fill as needed. No problems should arise unless the water gets too hot.
Do I need to add nutrients or hormones?
The basic answer to this question: Rootless cuttings do not require nutrients. You don’t need to add any nutrients to the water until your cuttings roots have grown past 3 inches.
Freshly snipped, many cultivators apply a rooting gel such as Clonex to the cuttings (not required). This will get washed off and added into the water supply when the pump is turned on.
When using water devoid minerals and nutrients (R/O or distilled water) some like to make up for it using a tiny dash of cal-mag supplement. Others swear by a diluted touch of vitamin B rooting hormone such as Root Juice, SuperThrive, or even sea kelp (Maxicrop).
Nonetheless, no one can argue that simple clean water does the rooting job safe and effective. At least until the roots have come out. Then you can add your roots accelerator or rapid start, ect.
What kind of light should be provided to cuttings?
Cuttings do not require a lot of light to grow roots. Remember sprouting beans in school science class? A little different, but basically the same theory. You don’t need a lot of light for root growth to happen. Fluorescent bulb and/or indirect light works best. Avoid direct sunlight!
Cannabis plants are photosensitive, responding to changes in the light hours per day(excluding c. ruderalis aka autoflowers). An annual herb, cannabis has separate growth and budding stages. Cuttings should be in their vegetative growth cycle, as they are beginning their growth. To do this it is important to make sure you have at least 16 hours of light per day on them. 18 hours or more of light per day is optimal.
Some cultivators keep their clone machine in a corner of their main grow room, which either uses HID or LED lighting. The cuttings get diffused light, but without too much intensity. This is fine, as long as temperatures stay within the guidelines.
CFL,T5 or T12 fluorescent bulbs are the best option for rooting clones. The florescent light is mellow enough to keep it on non-stop without worrying about cuttings wilting. Hang the lights 5 – 8 inches (13 – 20 cm) above cuttings for best results.
How long to wait for rooting and transplant?
Operate the cloning machine for 24 hours nonstop until roots visibly appear from cuttings. You want the roots around 1½ – 2 inches (3.5 – 5 cm) before transplanting. In most cases, cuttings should be ready within 7 to 10 days.
Some cultivators like to wait until the roots have really established fat, for a stronger start on the root system.
So is it aeroponic or hydroponic?
Hydroponics is defined as growing plants directly in water, without any soil. Roots are submerged in constantly aerated water.
In Aeroponics, the roots of a plant hang freely, never being submerged in water. A drizzle or mist feeds the roots water and nutrients.
Sometimes aeroponics is described as a subset of hydroponics, due to the water being used. The confusion leads to many aeroponic machines being labeled as hydroponic. Hence the title.
Most professional clone machines are pure aeroponic set-ups. This includes any cloning machine that relies on a misting system. The roots of the cuttings hang freely and are misted regularly.
DWC (deep water culture) cloners aka”Bubble cloners” are a type of cloning machine that is considered hydroponic. These are the easiest to build at home, and are simply a bucket or tub of water aerated with air stone pumps. Holes are drilled in the top lid for plugs and cuttings. The roots of the cuttings often are submerged in the water with bubble cloner machines, but not always.
Aeroponic clone machines are the best reviewed among growers for producing fat healthy roots.
|Clone King||$$||See on Amazon|
|TurboKlone||$$$||See on Amazon|
|Clone Bucket||$||See on Amazon|
The post The 3 Best Aeroponic/Hydroponic Cloning Machines For Sale Reviewed + FAQ appeared first on Mold Resistant Strains.
This post first appeared on Best Outdoor Marijuana Seeds And Strains - Mold Re, please read the originial post: here