This issue clearly signifies that the router’s firmware is in corrupted state.  When this happens, users won’t be able to access their router’s web-based setup page. However, they even won’t be able to assign IP addresses to their computers connected to the router via DHCP mode. So, fix Linksys router Diag Led Error by applying our adept guidelines available with us.

Steps to Fix Linksys router diag LED error in following ways:

Step 1: Powercycle your Linksys router

To fix Linksys Router Diag Led error, the very step is ensure that users have performed a powercycle process.  This is one of the quickest and easiest step to get rid of this issue. To perform this, unplug your power cord of the router from a power outlet for at-least 30 seconds. Plug it back in however, one can also unplug their power cord, Internet, and Ethernet cables from its ports and plug it back.  Connect the power cord back to your power outlet.

Step 2: Assign a proper static IP Address

As it is seen that the router sometimes loses its ability to assign IP Addresses to the computers connected to it accurately. So, here as instructed by Linksys router Support technicians, users need to assign their computer a static IP Address properly.  After assigning a static IP Address, do perform a proper check about the computer’s connectivity with the help of Ping test process.

Step 3: Ping your router properly

A Ping test when performed helps users easily trace a communication between the computer as well as the router.  The computer will further send packets to the Linksys router and in return, your router will send out replies to validate the connection.

Step 4: Reset your Linksys router device

To fix Linksys Router Diag LED error, follow below instruction as suggested by technical team:

Press and hold your Reset button of the router for at-least 30 seconds and then, unplug its power cord for at-least 10 seconds. Plug in the cored again.

After resetting, users need to reconfigure their router. If users have Cable Internet service available, then apply guidelines to set up router device as guided by technicians.

Why customers should approach our tech support solutions?

• Award winning tech support solutions
• Small enough to care but large enough to manage every technical fault
• Trusted advice with future effective solutions
• We add value to your solutions not complications
• Expert team is always ready to assist you in every possible manner
• We are well known and reputed for our unique solutions
• Customers’ burden are taken away from them by following seamless transition
• Highly updated solutions are delivered
• 24/7*365 days service

For more such queries to be resolved connect with our team and get prompt responses!

We are assisted by skilled and competent technicians at 1-800-335-8177 Linksys Router Support Number available 24/7 hours to help resolved every minute to minute issue at your desk. Our team is highly qualified and capable of handling even the most complex level issue with adept solutions. So, call us anytime and get prompt remedies at your desk.

The post How To Fix Linksys Router Diag LED Error? appeared first on .