HP Photosmart 7520 Printer Ink Cartridges Setup Guide to solve issues Quickly

When you initially set up your printer, you need to install the cartridges that come in the box along with the printer.

1. Switch on the power source to which the printer is connected.
2. The carriage is located below the scanner unit.
3. Lift the scanner lid and grip the holder in the slot.
4. Take away the yellow tapes on the new ink cartridge without touching the copper-colored contacts or nozzles on the cartridge.
5. Some ink may evaporate, but the quantity will be less if the cartridges are uncapped.
6. Pull the ink cartridge access door and wait for the carriage to move to the middle.
7. Install the cartridge into the slot.
8. An error can be caused if there is a failure to install the setup cartridges at the time of the initial product setup.
9. Ensure that the cartridge color matches the color marked on the slot.
10. Check if the cartridges are placed correctly and firmly in the slot.
11. The same should be repeated for inserting the other cartridges. After making sure that all the cartridges have been installed perfectly, close the access door.
12. Wait for your printer to print an alignment page and scan the page.
13. The printer will do the alignment for the ink cartridges. If you get the error message again, then contact the technical team for support.