Don’t you want your Hair Clipper to last for ages? Because If cared properly, hair clippers are made to last for a generation. You probably have that friend too who’s grandpa leaving his hair clipper for old Gary to take care of his manliness. If you don't, it's alright, but the point is hair clippers really can last for a very long time. The trick here is you have to know how to use hair clippers properly. Because there are so many wrong ways to use your hair clipper, it is easier to go down to those incorrect ways to use your hair clippers. In today's guide, I will enlighten you about how to use your hair clipper properly and how to sharpen your hair clipper blades to make them last longer.

Cutting hair with a rusty clipper can be really a pain in the butt. Though today’s hair clippers are vastly improved and different than what it used to be 20 years ago. When you used to hate to go to the saloon. God, it did hurt like hell when the blunt clipper started to pull here or there. If you don't take care of your hair clipper well, no matter how good your hair clipper at cutting, once the blade goes dull it will hurt.  But no more. Today I teach you some beneficial information about how to take sharpen you're and keep it clean properly.

Keeping hair clipper blade sharp is very important. Sharpening is a major task of maintaining the hair clipper damage free. Because the blades take most of the beating throughout the cutting. The blade also contacts with your exposed skin so if you should keep the blades sharp and germ-free. A dull blade will not only hurt you, but it will also leave the hairline uneven. You certainly don't want to end up with a weird haircut before going to somewhere really important.

Are You Want To Get Knowles About This Information

Top 10 Best Professional Clippers For Barbers Or Men

Top 8 Best Andis Clippers Review

Best Cordless Hair Clippers Reviews

Top 5 Best Balding Clippers Reviews

Before you start anything, it’s important to know if your blades really need sharpening. Because many blades are nowadays stylized as “self-sharpening”. Because those blades are adjusted to the proper angle so that it doesn't need to sharpen it. They require the least amount of sharpening. Check out the features of your hair clippers and check whether it says self-sharpening or not. If it as a self-sharpening blade then all you need to do is to resemble your blade and check it. If the sharpness has been improved, it doesn't need the sharpening.

Sharpening and cleaning of your hair clipper don't need so many tools. With few tools and very few easy steps described here, you will be able to clean your hair clipper and sharpen the blades.

1.    A screwdriver to unscrew the blade from the clippers

2.    A cleaning brush to clean off the hair and dirt.

3.    A sharpening tool

4.    Cleaning oil to reduce the friction of blade after sharpening.

The types of blade you choose directly affect the hair clipper. Because how fast a hair clipper can cut it depend on the sharpness of the blade mostly. Also, it is important to select an easily detachable blade. Otherwise, it will be a hassle for you to clean the hair clipper and its blades.  If you decide to pick the wrong kind of blade that is not going to serve you well and cost some more money. So let's learn about the types of the blade before we move to how to clean them and sharpen them for maximal use.

Unless you are serious about experimenting more with your favourite clippers blade, you are going to stick with the stainless steel blade. Because these steel blades are the most affordable blade available. Stainless steel blades are resistance to the rusts, and they are easier to maintain. They are sharp an up for any kind of heavy duty or more moderate usage. But they are not impregnable either. It needs proper maintenance keep the blades rust free.

Why should you get ceramic blades? Because ceramic blades are incredibly durable. They are made out of hard-pressed ceramic. Ceramic is one of the most heavily dense raw material. Moreover Ceramic is not a very good conductor of heat. Adding to the benefits, the ceramic blades do not go blazing heat after a long day of use either. Continually overheating of the blades can make a hair clipper last shorter period.  Ceramics have mechanical superiority over other blades. You will be amazed to see its sharpness. These blades give a haircut so fast, they are fascinating. They are the sharpest blade out there. But it should be handled with care because they are very delicate too.

Coated blades are best of both worlds. They are usually carbon steel blades coated with ceramics or titanium. Because ceramics are much harder and sharper, but they lack the toughness. Titanium is a special material used by some company in their blades. Titanium blades are extremely durable. Its resistant to the rusting process made it pretty much the immortals among the metals. Hence the name titanium. On the downside, with great features, come to an extremely higher price. 

Here, In this a step by step guide I break down the process of sharpening your hair clippers blade  It will walk you through all the necessary steps, from start to the very end. So take a seat and be ready to get blown away by how slick and precise this guide is. Though all those maintenance, cleaning and sharpening might seem unimportant, a good hair clipper can save up to a 500 to 1000 buck a year! So if you want to save that extra amount of money you better pay attention.

Step 1

The blade comes attached with the hair clippers head. You will need to remove the blades from the hair clippers. The process is fairly simple. All you need is a simple screwdriver to unscrew the two screws that are keeping the blade and the hair clipper together. De assemble the blade carefully. Because you don't want to be messed up when reassembling the blade again.

This simple yet important part of sharpening the hair clipper blade requires a tedious amount of attention to the details. Because it is easy to lose the focus and forget the placement of the unscrewed items. Be sure to put together things where they belong. But most of the hair clippers are pretty easy to remove from the head. But if you come across a blade that is not so easy to remove, its time for using the tweezers. It will help you to Gary up the screws and make the process easier.

Step 2

Next thing to do is clean up the hair trash that's piled inside the small hole in the blade. It is necessary before you start sharpening the blade. Depending on how often you clean up your blades, the hairs stuck into the blade is what actually makes it dull. A dull blade is worse than having no hair clipper at all. So ideally you should clean your blade once a while. Not just once a year and then forget the whole idea of cleaning. Cleaning the blade after each use is a very good idea, but nobody has so much time. So try to clean as often as possible.

Start with cleaning the long hairs stuck into it with a brush which should be included with the hair clipper. If you can't find where did you keep it, a hairbrush will be an applicable alternative  Clean your blade with warm waters. Because shorter hairs need to be softened up before cleaning. Otherwise, they will be stuck there for a long time, and blades will never be fully sharp.

Cleaning solutions are the next step. It is There are just so many out there. Go and get one. Or you can use a mixture of white vinegar with water. White vinegar is a very good alternative to it. Make sure you find the perfect mixture to get the most cleaning the germ out of it. Once you are done, let the blade dry for few minutes. The blades should be dry by now. If it is done then mop further it with a dry towel and move to the next step.

Step 3

A Sharpening Stone Is The Most Necessary Piece Of Equipment You Are Going Use. You Might Have Some Experience With Sharpening Knives With The Stones Then It Will Become Very Easy.  If You Have Never Done Sharpening With The Blades Don't Worry. They Are Nothing To Be Afraid Of. Its Relatively Easier To Sharpen The Blades With The Stone. Also Known As Water Stones, You Can Find This In Any Hardware Store. Just Go And Ask For One. These Stones Are Measured By A Special Scaling System Called Grit. The Number Of Grit Stone Has The More Finer The Polish Will Be.

There Is Various Kind Of Stones Available Right Now. Until Now The Most Common Type Of Stones Were The Oil Stones. But The Water Stones Are Really Very Popular To The Masses Right Now. Water Blades Are Good For Faster Cutting. It Is Available Both Natural And Synthetic Form. But We Will Be Discussing The Synthetic Ones Solely Because They Are More Accessible.

You Need To Sharpen Both The Top And The Bottom As Well. Angle It 45 Degrees And Start By Gently Pressing The Blade Against The Surface Of The Stone. Rub Back And Forth On The Surface Of The Stones. Do It For Ten Times An Check Your Blade. It Should Be Smooth And Sharp By Now.  Do This For Both Edges.

If You Have A Ceramic Blade Too Sharp, Then You Need A Different Kind Of Sharpening Stone. They Are Called Diamond Stones. But The Good News Is Ceramic Blades Does Need A Lot Of Sharpening.

Step 4

Now You Are Going To Oil The Blades. The Importance Of Oiling Can Be Described Enough. Frequent Oiling Is The Best Way To Make Sure Your Hair Clipper Last For Upcoming Years. Because Oil Is A Critical Component Of The Machine Keep Going. If You Don't Oil Your Clipper After Sharpening Every Time The Blade Will Be Damaged Pretty Soon Due To The Increasing Amount Of Friction.

Often It Is The Less Frequent Oiling The Blade Is The Reason A Hair Clipper Can Go Broke. So Make Sure To Oil Your Blade After Every Cutting. If You Can't Motivate Yourself To Oil It Every Time, It's Okay. Just Make Sure You Do It More Frequent.

Its Bit Tricky To Do As You Have Been Cautious About The Oil Getting Inside The Actual Body Of The Hair Clipper. Because That Will Make Your Hair Clipper Dirty Because Oil Attracts Dirt To It. To Avoid This, Put The Head Faced Away From You And Then Put Few Drops Of Oil. Make Sure It's Not Much Because You Don't Need A Lot Of Oil For Your Clipper.

Step 5

After All Of These Described In Above Steps Are Done, You Need To Reassemble The Whole Hair Clipper. You Need To Be Extra Careful Because Your Hair Clipper Won't Work Properly Otherwise Make Sure The Blades Are Aligned Properly. Put The Screws And Attach The Blades Again. Check The Clipper Is Working Properly By Running It For Few Minutes.