Are you looking for information on Peugeot 208 tires? Find all the information you need about Peugeot 208 tires on this practical sheet and all our tips for choosing the right Peugeot 208 tire for your car!
Peugeot 208 tire pressure
Check the pressure of your tires at least once a month. This check must be carried out on cold tires, having traveled a maximum of 2 to 3 km. In the case of a hot control, add 0.3 bar to the recommended pressure. Do not forget the spare wheel and always check the condition of the valve.
When to change your Peugeot 208 tires?
The Highway Code requires that tires have relief carvings (the maximum wear tolerated is 1.6 mm), do not have a tear on the sidewall and have no part of the apparent canvas. It is therefore advisable to change your tires as soon as they are damaged, that the wear becomes blatant, or following a puncture. For example, the appearance of a hernia following a shock against a sidewalk requires the change of the tire.
To check the depth of the sculptures, the tires have wear indicators placed at the bottom of the engraving and distributed around the tire. They are located by the marks “TWI” engraved in the sidewall of the tire. The wear indicators begin to flush with the tread surface when the depth of the profile is 1.6 mm.
Driving with tires that are in poor condition can lead to loss of grip (on dry roads or hydroplaning on wet roads) and increase the distances required to brake and stop the car. In addition, you risk a ticket of 135 €, and the immobilization of your vehicle by the police.
Where to buy Peugeot 208 tires?
To change your tires, you can turn to your dealer, garage, or auto center. You can also order your tires on the Internet. In this case, be sure to have a solution for mounting tires ordered: some sites offer a list of garages partners who will arrange the installation of your tires. You can also go to the car center.
How to choose your Peugeot 208 tires?
The tires are identified by a series of technical characteristics, indicated on the sidewall of the tires:
- The width of the tire in millimeters.
- The series, size or height of the sidewall of the tire, expressed as a percentage of the width. For example, for a 205/45 tire, the sidewall measures 45% of 205 mm, or 92 mm.
- The type of carcass structure: it is a one-letter code that characterizes the technology used to design the tire carcass. Today, it is still “R” (radial) for passenger vehicles.
- The inside diameter of the tire, which is also the diameter of the rim. The value is expressed in inches (1 inch = 2.54 cm).
- The load index: it is a two-digit number that identifies the maximum weight that the tire can bear.
- The speed index: it is a letter that identifies the maximum speed allowed by the tire. For example: T for 190 km / h, H for 210 km / h, V for 240 km / h, etc.
On the same axle, it is imperative to mount identical tires: the new tires must, therefore, have the same specificities as the old ones, and be of the same structure, of the same dimensions and the same speed and load indices. If you change only two out of four tires, the new tires should preferably be mounted at the rear of the vehicle to maintain a better grip at the rear and avoid head-to-tail.
Original Peugeot 208 pneumatic mounts
The Peugeot 208 is delivered with the following tires:
- 185/65 R15 88 T
- 195/55 R16 87 H
- 205/45 R17 88 V
The brands of tires fitted as standard on the Peugeot 208 may vary, but most often found Michelin, Bridgestone or Continental.
Learn more
The information on this page is provided for information only. The specifications and equipment of each model are likely to vary over time and change Peugeot tariffs, or according to the many countries of destination.
The post Best Tips for choosing the right Peugeot 208 Tires appeared first on Auto Mechanic.
