Despite the fact that retailers offer hundreds, even thousands, of different styles of rings, some customers still have difficulty finding one with all the qualities they are looking for. Luckily, today’s Jewelry shoppers no longer have to settle on a Ring they do not like.Nowadays, customers already have the option to create personalized rings, thanks to the advanced technology of 3D printing.

In any case that you are not updated with the technological transformation, 3D printers are advanced tools capable of printing three-dimensional objects.

But one of its most impressive uses is in the creation of jewelry pieces, where 3D printing has given consumers the power to design and create exquisite custom jewelry most especially for rings.

Long before 3D printing existed, jewelers had to spend hours carving out a detailed Wax Model from a larger wax block manually. This wax model would then be used to create a piece of jewelry. But because of the time and energy consumed to design just one piece of jewelry, it was truly hard for jewelers to offer custom jewelry pieces to their customers, which is why custom jewelry is often affiliated with exclusive stores and extravagant prices.

3D printing hastens the process rapidly by producing the wax model in a portion of the time that it takes to carve it by hand. Aside from the time and effort saved for a jeweler, it also allows them more creative freedom, since 3D printed waxes are not limited, unlike hand-carved waxes. With 3D printing, jewelers can now give customers the freedom to create custom pieces at low-cost prices.

The first step to creating a custom ring using 3D printing is to design. Jewelers will work with the customers to get detailed information on what kind of ring they are looking for. Some customers already have their idea of what they want and will come prepared with pictures. But some may still need a little more guidance. Visit this page for create custom rings: https://www.classicdiamondhouse.com/diamonds/diamond-engagement-rings/

As soon there is already an established design, a jeweler will use CAD (computer-aided design) software to put together the design and print a mold of the finalized design. Computer Aided Design Software is not easy to use, in fact, jewelers and designers must undergo two years of training before they are able to use CAD to create custom pieces. This software is the same with what engineers and architects used, but creating a piece of jewelry is often more complicated than creating prosthetics or building materials because of the level of detail that is implicated for the extremely small scale on the field of jewelry.

Nowadays, jewelers can already create a three-dimensional drawing of a ring by the use of CAD. This software also allows you to see the drawing at different angles to make sure it is perfect.

Once the 3D drawing is finalized, the jewelry designer will then push through and start the process of lost-wax casting, which includes making a wax model of the approved design. The model will be compared to the three-dimensional drawings to make sure that the designs would match and it will be sent then to a casting facility.

This time, the wax model will be put inside a container and will be covered with liquid plaster to create the mold. The plaster is then left to be firm. Once it is hardened, it is then heated slowly to ensure that no moisture remains, and to prevent the mold from going into heat shock when placed in an ultra-hot furnace.

The mold is placed in the oven to melt and shed the original wax model, leaving behind an impression of the ring. Once the mold is cooled, it can with liquid precious metals such as silver, gold, or platinum to create the ring band and setting. The final step is to remove the plaster to reveal the beautiful finished product.